- Home
- 25324722103
- Instructions
25324722103 Kenmore Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Could Not Lock
2 of 6 people
found this instruction helpful.
-
brenda from snellville, GA
- Really Easy
- Less than 15 mins
Oh yea thanx to partselect it went great didnt get fisrtkey but when got the second key it worked great thanx partselect
Was this helpful?
Thank you for voting!
Plastic shelf supports broken
6 of 24 people
found this instruction helpful.
-
shari from west sand lake, NY
- Easy
- 15 - 30 mins
-
Pliers
Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm!
Other Parts Used:
Was this helpful?
Thank you for voting!
not cold enough
-
Gary from Hudson, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section
Was this helpful?
Thank you for voting!
Frige and freezer not cooling
-
FRANK from BRADENTON, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver
I should have ordered start kit instead of start capacitor. The start cap astir did not fix problem so I ordered kit. Compasator comes as part of kit. Followed enclosed instructions. Cut existing wires and reconnected new wiring. Simple as that. It's a plug in item. Now worried it may be working to good. Freezer down to 10 deg. Watching
... Read more
to see if compressor is running to long. Seems ok lol. Wife hates me now. She wanted new frige.
Read less
Was this helpful?
Thank you for voting!
Initially on full time then off full time
-
JOHN from Palmyra, VA
- Easy
- 15 - 30 mins
-
Screw drivers
A 1,2,3 approach: 1, order the right part at the best price, Part Select has easy to navigate website and provides updated info on what will work in your appliance at a fraction of other site costs. 2. Configure the appliance to control the temp for a few days to save the food. This is accomplished by jumpering the two control wires to k
... Read more
eep the compressor on and plugging the appliance cord into a timer with a 2hr on and 4hr off cycle. use the thermometer verify 0 degrees. 3. When the temp control is delivered unplug the power cord and proceed to repace the temp control, using care not to crimp the temp sensor bulb tubing. A #1 phillips screwdriver will release the control housing and temp sensor clamp assy. When complete set control to mid range and plug appliance into wall outlet. Use thermometer to set desired temp.
Read less
Was this helpful?
Thank you for voting!
compressor not running
-
wilson from indialantic, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Wrench (Adjustable)
thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.
Was this helpful?
Thank you for voting!
won't start repaced the run capacitor didn't solve the problem so I ordered a defrost timer
-
Curtis from Winlock, WA
- Really Easy
- 15 - 30 mins
I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises
Was this helpful?
Thank you for voting!
stop-basket was broken
-
Kenneth from Tahlequah, OK
- Really Easy
- Less than 15 mins
I stuck the new stop-basket in the hole where it belonged.
Was this helpful?
Thank you for voting!
the compressor capacitor overheated
-
Bart from goldsboro, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Was this helpful?
Thank you for voting!
Replace the handle mount
-
RUTH from AUSTIN, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.
Was this helpful?
Thank you for voting!
refer quit cooling and so did freezer
-
jerry from petaluma, CA
- Really Easy
- Less than 15 mins
I replaced the defrost timer,defrost thermostat,and run cap.as it turned out the compressor went bad. I dont know the model because but the time I got this review I replaced the refer with a knew one . two weeks living out of coolers was so much fun !!!!!!!!
Was this helpful?
Thank you for voting!
lost key
-
Stephen from noble, OK
- Really Easy
- Less than 15 mins
Ordered freezer key friday afternoon received it saturday afternoon. Fast service
Was this helpful?
Thank you for voting!
The frezzer ran continusly never shut off.
-
Calvin from New Port Richey, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
The installation was really simple, no problem. No instructions needed. What surprised me was, The new thermostat was installed in less then 24 hours after it was ordered. I live in FL
Was this helpful?
Thank you for voting!
Needed a freezer key
-
Nancy from Star Lake, NY
- Really Easy
- Less than 15 mins
We really didn t need to do a repair, we just ordered a freezer key that we didn t have. I must say the shipping was fast we received it the next day. It was worth the shipping charge. We will be ordering again. Great service.
Was this helpful?
Thank you for voting!
freezer door got locked and we couldn't find the key
-
Linda from Fresno, CA
- Really Easy
- Less than 15 mins
inserted key and turned
Was this helpful?
Thank you for voting!