All Installation Instructions for Kenmore Freezer 25321742514

Door would not open all the way

Removed items from door. Put down blanket on floor. Remove top hinge cover. Removed small bolts. Open and lift door off bottom hinge. Put on blanket on side and remover screw holding upper closure. Installed new closure. Removed bottom closure and installed new closure. Reinstalled door and closed to frame. Reinstalled top hinge and bolts adjusted door and tighten bolts. Reinstalled top hinge cover. For indicator light. Unplug unit and removed screws for kick plate. Removed light holder and removed terminals. Removed light and install in reverse order.

Parts Used:

HINGE BEARING

Indicator Light

Door Closing Cam

Wesley from PRINCESS ANNE, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

While defrosting freezer tossed the drain plug with ice and water into the sewer system.

Opened mailer and bag and place the drain plug into the drain. fit perfectly. In fact it is better than the one lost since the original needed a screwdriver or tool to remove the plug. This one has a flang or finger turner on it so that it can be removed. Also, does not interfere with items in bottom of freezer.

Parts Used:

Interior Drain Plug

paul from LISLE, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door gasket was not working

Unscrew it off and screw the other on

Parts Used:

Door Gasket - White

Claudia from Paulina, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Our freezer started getting frost really bad and I decided to try a new seal and there we go voila problem solved

Removing the old one took longer than installing the new seal...its a one person job bit my son helped me..

Parts Used:

Door Gasket - White

CJ from HAMBURG, AR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door would not fully open

-got friend
-got step stool
-removed upper hing w/3/8 nut driver
-lifted door vertically off of lower hing pin (w/friend)
-removed and replaced broken nylon washer
-lifted door back onto lower pin hing hole
-while friend holds door reinstall upper hing bracket with 3/8 nut driver
-had cup of coffee

Parts Used:

HINGE BEARING