All Installation Instructions for Jenn-Air Cooktop 2380EGS

easy as pie

Just remove the old ones and replace them with the new ones. no tools necessary.

Parts Used:

Drip Bowl - Chrome - 8 Inch

Range Grease Filter

Drip Bowl - 6 Inch

Michelle from College Station, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Filter replacement.

Remove and replace grease filter.

Parts Used:

Range Grease Filter

Gerald from Maplefalls, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

vent fan cloging up

old filter fell into from removing and cleaning,
removed cover pulled out filter ,replaced it with new one.

Parts Used:

Range Grease Filter

JAMES from McALESTER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

The switch didn't control the heat range

Took the front panel off by removing 4 screws. Then remove the switch by loosing the nut hold it. Then replace the wire on the new the way they were on the old switch. Put the panel back on.

Parts Used:

Surface Unit Infinite Switch Kit

Samuel L. from Cardington, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Filter needed replacement. Old one was falling apart.

Removed old filter, dropped in the new one.
(This really was not a "repair")

Parts Used:

Range Grease Filter

Sophie from Warrenton, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

stove top burner

perfect

Parts Used:

Delta Frame Surface Unit - 8 Inch

MYRTLE from GRETNA, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Old grease filter had hole wore through

Pulled the old one out & inserted the new one. Less than five minutes.

Parts Used:

Range Grease Filter

Michael from Mountain Iron, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Sockets for the burner elementss were burned out

I removed the burner elements for three burners by lifting the surface top and unplugging them. I snapped out the plug sockets that were burned out and cut the two wires, one element at a time. Using the included wire nuts I stripped the ends of the cut wire and connected each wire to one of the wires on the new socket. Once the wires were connected I snapped the sockets in place and reinstalled the elements, lowered the surface top and the range was ready to use.

Parts Used:

Surface Burner Receptacle Kit

Martin from Manchester, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

My 8 inch stove top element would not heat

I first replaced the element and the receiver. This required splicing lines which was very easy. It still did not heat (even though my element indicator light was on) so I replaced the switch regulator. This took a little time because of the small space on my model. In fact, I had to replace a wire that had shorted by splicing a 3 inch section into it. When that was done, I simply re-connected the 5 wires in the original positions and reattached the cover. It works like a charm and my wife is delighted because we are hosting a family reunion/baby shower tomorrow!

Parts Used:

Surface Unit Infinite Switch Kit

clifford from mead, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

electric grill would not turn on.

Removed 2 screws and i nut. Unplug the old switch and plug in the new switch and presto, back in business. Extremely easy. Part was exactly as pictured. Part arrived within 2 days. Great Co. to buy parts from. Highly recommend Partsselect.

Parts Used:

Surface Unit Infinite Switch Kit

Anthony from Tribes Hill, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Worn out stove top

We replaced the burner grates, knobs, air filter and burner pan. Looks as good as new!

Parts Used:

Range Grease Filter

Redona from Roseville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

New Filter & New Knobs

Simply replaced these items with no difficulty. John legrand

Parts Used:

Surface Burner Knob

Range Grease Filter

John from Bossier City, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

needed new drip bowls

just installed

Parts Used:

Drip Bowl - Chrome - 8 Inch

Drip Bowl - 6 Inch

Carolyn from RR1 Box 1243, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

intermittent heat from burner

Pulled out electric heating element and replaced with new. I have had this frustrating problem for 2 years and after replacing the elements they now work like new! My only question, why did it take me so long to replace???

Parts Used: