Models > 1CWTW4815EW0 > Instructions

1CWTW4815EW0 Whirlpool Washer - Instructions

All Instructions for the 1CWTW4815EW0
61 - 67 of 67
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No fabric softener dispenser
Take out cap and replace with new cup
Parts Used:
Fabric Softener Dispenser
  • Patricia from Berkley, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
My washer did not come with the fabric softener dispenser
Easy as ONE TWO not even a THREE. Just pulled off the cap on top the agitator and dropped in the dispenser. Gave it a little push to seat it and done. Sure beats the softener ball.
Parts Used:
Fabric Softener Dispenser
  • joe from Cato, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
no softener dispenser
Installed cup dispenser and started the laundry
Parts Used:
Fabric Softener Dispenser
  • roy from mcdonough, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Missing lid hinge bearing
1) Using a Phillips head screwdriver, the two screws retaining the hinge pin to the lid were removed. 2) Remove hinge pin and tilt lid slightly to gain access to bushing hole. 3)Install new bushing in hole. 4)Reposition lid. Insert hinge pin through lid and into bushing. 5)Reinstall hinge pin retaining screws and tighten.
Parts Used:
Lid Hinge Bearing
  • Kim from Oviedo, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Fabric Softener Dispenser won't dispense softerner.
Very easy. Just snapped it on.
Parts Used:
Fabric Softener Dispenser
  • Rennel J from Rosamond, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Softener started dispensing some black gunk . I cleaned the dispenser but could not get all the gunk out. Decided to install a new dispenser.
Pulled off the old dispenser and popped on the new one. As easy as that. No tools needed. By the way. The service at Partselect was unbelievable. Had the part in about four days. Thanks Partselect.
Parts Used:
Fabric Softener Dispenser
  • Donald from Zephyrhills, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Needed fabric softener dispenser.
Ordered the part... snapped it in place.... piece of cake!!! The people at Part Select are phenominal.... best customer service I've seen in years...
Parts Used:
Fabric Softener Dispenser
  • Robert from Palm Desert, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 1CWTW4815EW0
61 - 67 of 67