1927 - Overview

Models starting with 1927

Click on the best match to narrow your results.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Door Switch – Part Number: W11384469
$43.83
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(36)
Part #W11384469
Door switch turns the light off when you close the door.
Refrigerator Condenser Fan Motor Kit – Part Number: 833697
$115.19
In Stock
Refrigerator Condenser Fan Motor Kit
★★★★★
★★★★★
(20)
Part #833697
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Ice Cube Tray – Part Number: WP61002140
$38.95
In Stock
Ice Cube Tray
★★★★★
★★★★★
(3)
Part #WP61002140
This 48 cube ice cube tray is eleven inches long. It is all white in color and it is made entirely of plastic.
Single Outlet Water Valve Kit – Part Number: 4318047
$57.58
In Stock
Single Outlet Water Valve Kit
★★★★★
★★★★★
(1)
Part #4318047
The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.
Screw – Part Number: WP488729
$10.50
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Evaporator Fan Motor - 115V 60Hz - Blade NOT Included – Part Number: WP61004888
$114.19
In Stock
Evaporator Fan Motor - 115V 60Hz - Blade NOT Included
★★★★★
★★★★★
(1)
Part #WP61004888
This evaporator fan motor assembly is just over three inches long. It is made of both metal and plastic, and is made up of black, white, and metalllic pieces.
Refrigerator Screw – Part Number: WP489478
$10.41
In Stock
Refrigerator Screw
Part #WP489478
Sold individually.
Defrost Heater – Part Number: WP60106-35
$92.12
In Stock
Defrost Heater
★★★★★
★★★★★
(2)
Part #WP60106-35
This radiant glass defrost heater is twenty and a half inches long. It comes with an instructions sheet, and is intended for use with the freezer evaporator of some refrigerators.
Refrigerator Compression Nut – Part Number: WP627018
$17.55
On Order
Refrigerator Compression Nut
Part #WP627018
This compression nut is used with the plastic water line of the icemaker assembly.
Kickplate Clip – Part Number: WP60100-1
$11.95
In Stock
Kickplate Clip
Part #WP60100-1
This kickplate clip is an inch long and is made of metal. Two are needed per refrigerator.
Refrigerator Plastic Tubing – Part Number: WPB5705307
$26.95
In Stock
Refrigerator Plastic Tubing
Part #WPB5705307
1/4" Plastic tubing, 8 1/2 feet long.

Exact Part matches for your search term

Parts bag – Part Number: 1927
No Longer Available
Parts bag
This part number matches the current model number 1927
Part #1927
GASKET – Part Number: 1927
No Longer Available
GASKET
This part number matches the current model number 1927
Part #1927

Common Symptoms of models starting with 1927

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sometimes the condenser fan would start causing the refrigerator to overheat.
189 of 228 people found this instruction helpful.
  • Tom from Franklin, WI
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Was this helpful?
Thank you for voting!
Lights inside refrigerator not working
137 of 257 people found this instruction helpful.
  • Clint from Rayville, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this helpful?
Thank you for voting!
no water getting to ice maker
80 of 95 people found this instruction helpful.
  • Kevin from Boston, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
The ice maker had been slowly dying and one day just stopped making ice. No water was getting to the trays.

I read that this could be caused by a failure of the valve, even though the continuity test indicated that the solenoid was okay.

I ordered the part Friday afternoon. It was delivered Saturday. I did the repai r in 10 minutes.

I pulled the fridge away from the wall.

I unplugged the fridge. I closed the water supply valve.

I unscrewed the two mounting screws using a flat head screwdriver.

I pulled the old valve out from refrigerator.

Using an adjustable wrench I detached the water supply from the valve. I detached the hose leading to the ice maker from the valve.

I pulled the electrical connectors from the connectors on the valve.

I attached the hoses to the new valve, attached the electrical connector, screwed the new valve in its place, opened the water supply, plugged the fridge back in, checked for leaks, and waited for a few hours.

My ice maker is working better than it has in at least two years.
Was this helpful?
Thank you for voting!