156 - Overview

Models starting with 156

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$26.41
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(47)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Surface Burner Receptacle Kit – Part Number: 12001676
$27.20
In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(30)
Part #12001676
This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.
Standard Y-Frame Range Surface Burner – Part Number: WP660532
$38.62
In Stock
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(2)
Part #WP660532
The manufacturer suggests replacing the receptacle at the same time.
Heat Resistant Adhesive – Part Number: W10841140
$29.65
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
ELEMENT BAKE - RB147 – Part Number: WG02F05395
$135.45
In Stock
ELEMENT BAKE - RB147
★★★★★
★★★★★
(9)
Part #WG02F05395
This bottom oven bake element is designed for 30-inch electric ranges and ovens, delivering reliable and even heat for baking. Rated at 3000 watts and operating on 240 volts, it helps resolve common issues such as no heat, uneven heating, or a visibly damaged element. Installed at the base of the oven, it restores proper cooking performance when the original element fails. Always disconnect power before installation, and be sure to verify your appliance model to ensure proper fit.
Light Cover – Part Number: WB36X192
$27.85
Special Order
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Surface Element Kit – Part Number: 4392061
$119.88
Special Order
Surface Element Kit
★★★★★
★★★★★
(2)
Part #4392061
This kit includes two 8" elements, two 6" elements, four receptacles and any remaining hardware needed for installation.
Fluorescent Lamp/Bulb – Part Number: F26T8-CW-4
No Longer Available
Fluorescent Lamp/Bulb
Part #F26T8-CW-4
Economy Y-frame Surface Unit - 8" – Part Number: WPY04000035
$104.98
Special Order
Economy Y-frame Surface Unit - 8"
Part #WPY04000035
This electric range economy Y-frame surface element measures eight inches and has five turns. It carries 2100 watts and is used on some electric ranges. The center medallion is chrome.
Splash Guard And Stopper – Part Number: 5304503364
No Longer Available
Splash Guard And Stopper
Part #5304503364
With the splash guard and stopper it is a rubber cover that goes over the sink drain to allow you to put food items or water in to the disposal. This part stops liquids & food particles from splashing back up in to the sink. With normal wear & tear of the splash guard it will eventually need to be replaced.

Common Symptoms of models starting with 156

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove top element not working due to bad receptacle.
196 of 216 people found this instruction helpful.
  • Richard from Carthage, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister 's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Was this helpful?
Thank you for voting!
Burner was out but the burner coil worked on onother burner
10 of 10 people found this instruction helpful.
  • Richard from Orange, CA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select.
Was this helpful?
Thank you for voting!
burner receptacle burned out
8 of 9 people found this instruction helpful.
  • Michael from N. Haverhill, NH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Worst part of the job was removing the old screws that held the two old rectecles in place for the two burners I repaired. Once the screws were removed cut the wires stripped them and used the porceliean wire nuts provided with the kit. Easy job and good instructions.
Was this helpful?
Thank you for voting!