14440 - Overview

Models starting with 14440

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heat Resistant Adhesive – Part Number: W10841140
$29.65
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$16.37
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Fluorescent Lamp/Bulb – Part Number: F26T8-CW-4
No Longer Available
Fluorescent Lamp/Bulb
Part #F26T8-CW-4
Oven Door Bottom Trim - Black – Part Number: WB07K10232
No Longer Available
HINGE REG – Part Number: WG02L02131
No Longer Available
Terminal Block Kit – Part Number: WB17T10011
$160.47
Special Order
Terminal Block Kit
Part #WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Washer - 12 Pack – Part Number: WB1X119D
$24.85
Special Order
Washer - 12 Pack
Part #WB1X119D
SCREW – Part Number: WR2X9260
$35.95
Special Order
SCREW
Part #WR2X9260
Leveling Leg – Part Number: WB2X8248
No Longer Available
Leveling Leg
Part #WB2X8248
SWITCH INF.2600W – Part Number: WB23M99
No Longer Available
SWITCH INF.2600W
Part #WB23M99

Exact Part matches for your search term

RED - L2 TO Lower CONV (L2 – Part Number: 14440
$6.53
Special Order
RED - L2 TO Lower CONV (L2
This part number matches the current model number 14440
Part #14440
Ferrite rubber – Part Number: 14440
No Longer Available
Ferrite rubber
This part number matches the current model number 14440
Part #14440

Common Symptoms of models starting with 14440

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
terminal block melted
56 of 77 people found this instruction helpful.
  • jonathan from willow springs, IL
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U nscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Was this helpful?
Thank you for voting!
microwave oven blew fuse
27 of 43 people found this instruction helpful.
  • tad from tamarack, MN
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th e help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Was this helpful?
Thank you for voting!
The gasket needed to be replaced in top oven, it was brittle and broken.
19 of 28 people found this instruction helpful.
  • JoAnn from Auburn, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove enti re oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Was this helpful?
Thank you for voting!