1339 - Parts

This is a genuine DeWalt replacement power cord, specifically designed for use with double-insulated tools. Built for durability and safety, it features two wires and two prongs, eliminating the need for a ground wire. The cord measures 8 feet in length and uses 18-gauge wiring, offering a reliable connection and flexible reach for your p...Read moreower tool needs. It’s sold individually and is compatible with the models listed below. Installation requires careful attention: the new cord wires must be properly inserted into the wire terminals, and the cord should be routed correctly to avoid pinching when reassembling the tool’s case or plate. For best results, refer to your tool’s manual or consult a professional technician.

This is a replacement part directly sourced from the manufacturer for use in drills, hammers, grinders, sanders, jigsaws, and trimmers made by DeWALT, Porter Cable, Black & Decker, and Bostitch. It connects to the power cord and is made out of metal. This part is extremely small and will need to be replaced if it becomes lost or if it breaks. The terminal is sold individually.

This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.

This replacement brush holder is specially designed for use with Dewalt and Black and Decker power tools. The purpose of this part is to secure the carbon brush around the armature to provide stable contact. One durable plastic brush holder with metal terminals is included per order. To replace this assembly you would need a screwdriver and pliers.

This is a genuine OEM replacement part, it is sold individually. The purpose of the Brush Cap is to retain the brush in the brush holder. It is removed by using a screwdriver. Do not use to much pressure when removing or replacing this part, it does have a tendency to break.

This item has been sourced from the original manufacturer to be used with drills from DeWalt and Black & Decker. The metal key fits into the slot on the spindle shaft and aligns with the keyway in the gear. This item allows the shaft and gear to rotate in unison. This item is sold as an individual replacement part.

This item is supplied directly from original equipment manufacturer. It is a very common accessory used with a variety of Black & Decker as well as Dewalt drills. This rubber holder helps user to secure chuck key for easy access. Includes one (1) chuck key holder per order. Please note, chuck key itself is sold separately.

Genuine Manufacturer Sourced replacement part used on a variety of Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 605511-00

This part is an OEM from DeWALT, Black & Decker, and Porter Cable for use in drills, sanders, and saws. The plastite screw attaches to the gear case. A torx screwdriver will be necessary during the installation of this part. It will require replacing if it becomes broken or stripped. Keep in mind this high-quality part is made of metal and is priced individually.

This is an authentic OEM part. The metal screw is compatible with a variety of DeWalt power tools, and is sold individually. A screwdriver is of course, required for the removal and replacement. It is encouraged to purchase a spare, as this item can wear over time and regular use.