130902-059 Briggs and Stratton Engine - Parts

This is an authentic OEM component from Briggs & Stratton. The oil drain plug is made for use with many small engines. The metal plug is often fastened into the crankcase cover, and is removed to drain the oil as needed. A hex key or Allen wrench is necessary for the removal and replacement. The oil drain plug is sold individually.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to secure the muffler deflector or to secure the starter clutch to the flywheel. This item is available as an individual replacement part.

This item is a genuine replacement part that has been OEM sourced and is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The rubber seal is used to prevent oil from leaking at the connection between the bottom of the oil fill tube and the crankcase. This item also allows the fill tube to firmly sit into the case. The dipstick tube seal if available as an individual replacement part.

This is an original Briggs & Stratton replacement part. The starter grip pin is commonly found in machines with small engines, such as snowthrowers, tillers, and generators. This part is made of metal, and is used to help secure the starter grip on the starter rope. No tools are required when replacing this item. Simply remove the old part and insert the new one in its place. This part is sold individually.

The metal screw attaches to the muff guard bracket. It is a genuine replacement part sourced from the original manufacturer for use with blowers, engines, generators, pressure washers, snowblowers, and vacuums made by Briggs & Stratton, Toro, and Lawn Boy. This item is available as an individual replacement part. When replacing this screw a wrench will be needed. It will need to be replaced if it strips or breaks.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in engines, lawn tractors, and snow throwers from Briggs & Stratton and Toro. This part is made of metal, and is generally used to secure the cylinder shield. Please be aware that there are different screws used in the machine. Ref...Read moreer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

Restore your engine’s spark with this OEM magneto. It creates the ignition spark that keeps your equipment running smoothly. If you’re dealing with misfires or hard starts, replacing the magneto is a simple fix. Just unplug the spark plug, remove the old part, and install the new one with the correct gap for reliable performance.

This is an original replacement part manufactured for use with lawnmower engines. The special air cleaner cartridge is used to trap dirt and debris particles to prevent them from entering the engine's intake. Over time the air cleaner cartridge can clog and will need to be replaced as part of normal maintenance. This air cleaner cartridge is available as an individual replacement part.

This is a genuine replacement part manufactured for use with small engines. The muffler assembly is complete including the adapters, the gasket, and mounting hardware. The exhaust muffler is sold individually.

This is an authentic OEM part from Briggs and Stratton and Toro for use with garden equipment engines. The stop wire connects the ignition coil to the stop switch to ground the spark voltage to the engine block when you release the bail control bar. This part is sold individually. The tool that you will need to replace the stop wire is pliers.

This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vi...Read morebration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.

The exhaust gasket attaches to the exhaust manifold and helps to form a seal. It is an authentic OEM sourced part which is specially designed for use with Briggs & Stratton generators and engines, plus Toro snowthrowers and lawn tractors. This gasket is made of a flexible material and is priced individually. A screwdriver and a wrench may be needed to install this part.