1. Home
  2. 13-36
  3. Instructions

13-36 Tappan - Instructions

All Instructions for the 13-36
46 - 60 of 130

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Worn Drip Bowls
2 of 2 people found this instruction helpful.
  • River Oaks Town Homes from DES MOINES, IA
  • Very Easy
  • Less than 15 mins
Pulled out the old drip bowls and replaced with the new. A simple snap!
Was this helpful?
Thank you for voting!
Original terminal degraded and faulty
2 of 2 people found this instruction helpful.
  • Robert from PRAIRIEVILLE, LA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Turn off power, remove heat coil assembly and drip pan. Unscrew the terminal assembly from the range top. Cut back 3 inches on each terminal wire and strip insulation 3/8 inch. Terminal assembly should be with the short side of the black block (from the side securement hubs) facing toward the coil stems. Slide the shrink wrap onto each wire and Twist each old with each new wire using the wire nuts and slide the shrink wrap Over each. Using a hair dryer, heat gun, or open flame carefully shrink the wrap. Secure the terminal back in place on the range.
Read less
Was this helpful?
Thank you for voting!
the burner stop working
2 of 2 people found this instruction helpful.
  • Anthony J from HAMMONTON, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Just followed the instructions
Was this helpful?
Thank you for voting!
Burner on stove stopped worker
2 of 3 people found this instruction helpful.
  • Virginia from MT PROSPECT, IL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I did as instructed on your video of how to install the terminal block, btw GREAT VIDEO!!
I'm a 66 year old female and if I can do it, anyone can.

Thanks, PartSelect
Was this helpful?
Thank you for voting!
high power awful smell
2 of 3 people found this instruction helpful.
  • jim from gorman, TX
  • Very Easy
  • Less than 15 mins
  • Screw drivers
raise top of stove unplug burner plug in new one done
Was this helpful?
Thank you for voting!
My burners were shot!
2 of 3 people found this instruction helpful.
  • Karen from POPLARVILLE, MS
  • Very Easy
  • Less than 15 mins
Pulled out the old, and replaced. Very simple for a 62 year old woman! I cook a lot, being from the country, and Imwas so excited to get my burners fixed! Should have done it years ago! Thanks!
Was this helpful?
Thank you for voting!
Heavy jam boiler caused elements to sag
2 of 3 people found this instruction helpful.
  • Danny L from CHELAN, WA
  • Really Easy
  • Less than 15 mins
Removed the old & simply inserted the new one
Was this helpful?
Thank you for voting!
Replace Element & Drip Bowl
2 of 3 people found this instruction helpful.
  • Fernando from Orlando, FL
  • Really Easy
  • Less than 15 mins
Just replace the parts. Too easy for an old man.
Was this helpful?
Thank you for voting!
8" stove top element would not warm up.
2 of 3 people found this instruction helpful.
  • Margaret from Spencer, OH
  • Really Easy
  • Less than 15 mins
It was simple.............the range-top tilts up so I proped it with a stick of wood, pulled out the old burner and plugged in the new one (when I saw how inexpensive the new element was I orderd two to replace the other 8" because it didn't look long for this world either). The whole operation took less than 10 min. no tools or batteries required!!!!!!!!!.........no-mus-no -fus.

Your prices were the lowest I found on-line, keep up the great work!!!!!!!!!
Read less
Was this helpful?
Thank you for voting!
burner was damaged
1 person found this instruction helpful.
  • Thomas from Elizabeth City, NC
  • Really Easy
  • Less than 15 mins
snap out the old one and snap in the new
Was this helpful?
Thank you for voting!
Drip bowls needed replacing
1 person found this instruction helpful.
  • Doris from SUN CITY, AZ
  • Very Easy
  • Less than 15 mins
Removed the old ones and inserted the new ones.
Was this helpful?
Thank you for voting!
Old drip pans had turned to rusty lace.
1 person found this instruction helpful.
  • Helen from PAWLEYS ISL, SC
  • Very Easy
  • Less than 15 mins
Unplugged elements. Removed old pans. Wiped out holes. Inserted new pans, replaced elements.
Was this helpful?
Thank you for voting!
Left an appliance on surface element and melted paint onto the element
1 person found this instruction helpful.
  • Kenneth from LANOKA HARBOR, NJ
  • Very Easy
  • Less than 15 mins
Plug the new element into the space on stove
Was this helpful?
Thank you for voting!
dead burner
3 of 7 people found this instruction helpful.
  • Jan from Storm Lake, IA
  • Really Easy
  • Less than 15 mins
I unplugged the dead burner and plugged in the new burner. Very easy. No tools needed.
Was this helpful?
Thank you for voting!
needed new drip bowls and 2 new elements
1 person found this instruction helpful.
  • kathy from DAVIS, CA
  • Very Easy
  • Less than 15 mins
pulled them out and replaced them
Was this helpful?
Thank you for voting!
All Instructions for the 13-36
46 - 60 of 130