128M02-01 Briggs and Stratton Engine - Parts

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carbur...Read moreetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

This manufacturer approved recoil starter pulley is designed for lawn and garden equipment engines. The recoil starter engages the drive cup on the flywheel to start the engine when pulled. This assembly includes: Plastic Pulley and a Metal Recoil Spring.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The pan head screw is commonly used to secure the blower housing assembly. This item is sold as an individual replacement part. A screwdriver is needed to complete this repair.

This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

This is a manufacturer approved replacement part designed for use with a variety of lawn and garden engines. The air vane spring maintains the proper tension on the air vane choking system. If it is broken, it can cause the engine to not start. To replace it you will need pliers.

This control bracket is a genuine OEM replacement designed for small engine lawn and garden equipment. It secures throttle and choke cables in the correct position, helping regulate engine speed and ensure smooth, consistent operation. Made from durable metal for reliable alignment and long service life, it’s an ideal replacement when wor...Read moren or damaged brackets cause loose controls, poor throttle response, or engine speed issues.

This is an authentic OEM part. The Toro air vane is designed for use with many lawn mower engines. This plastic item pulls the choke open when the flywheel fan sends airflow from the air vane. You will need a wrench and a screwdriver for the installation. The air vane is sold individually.

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.

This fuel tank is for lawn and garden equipment engines. Fuel tank holds the gas that's needed by the engine. Work in a well-ventilated area when installing this part. Drain the existing fuel from the tank and disconnect the spark plug wire before beginning the repair.

It is an authentic OEM supplied exhaust gasket that is designed to provide an air tight seal between the muffler and the exhaust pipe. This part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Over time gaskets tend to shrink, become brittle and crack eventually requirin...Read moreg replacement. It is made of high-quality composite material and it is sold individually.