1259L26 Whirlpool Range - Parts

This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with elec...Read moretrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.

This round style carborundum gas oven igniter has 10 inch lead and amperage range between 2.5 and 3.0 amps. Be very careful when handling this igniter as it is very fragile. Please note - The bracket and screws are not included. This part will not replace the flat style igniters. Also known as bake and broil igniter.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This single round chrome drip pan is 7-7/16 inches in diameter. Its center hole has a diameter of three and a half inches wide. Use this chrome drip pan for your Whirlpool brand gas range or cooktop.