12561 - Instructions

All Instructions for the 12561
31 - 45 of 69

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The light inside the oven had burned out
3 of 7 people found this instruction helpful.
  • Catherine from SEATTLE, WA
  • Very Easy
  • Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap. ... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.
Was this helpful?
Thank you for voting!
Just follow the enclosed instructions
1 of 2 people found this instruction helpful.
  • HAROLD from Tucson, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Followed the instructions
Was this helpful?
Thank you for voting!
Bad sensor
1 of 2 people found this instruction helpful.
  • John from CASPER, WY
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
By myself
Was this helpful?
Thank you for voting!
Change bulb
3 of 8 people found this instruction helpful.
  • Louis from LEAGUE CITY, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Easy
Was this helpful?
Thank you for voting!
dropped & broke the oven light bulb cover
1 of 2 people found this instruction helpful.
  • joseph from san jose, CA
  • Really Easy
  • Less than 15 mins
popped the new one on!
Was this helpful?
Thank you for voting!
Orignal oven door handle had multiple fractures and was fast becoming useless.
3 of 9 people found this instruction helpful.
  • Gerald from Omaha, NE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the old handle with the new one.
Was this helpful?
Thank you for voting!
Oven handle broke off
3 of 9 people found this instruction helpful.
  • Maureen from Locust Valley, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Couple of screws and it was done. Simple and inexpensive since I thought I was going to have to buy a new range.
Was this helpful?
Thank you for voting!
Obsolete appliance parts missing
1 of 3 people found this instruction helpful.
  • Darrell from Cape Coral, FL
  • Really Easy
  • Less than 15 mins
Thank goodness for PartSelect.com
When we moved into our home the microwave and electric range are obsolete appliances and were missing parts. PartSelect.com has pictures of parts on one inch grid pattern so I was able to select the hard to find parts that would fit perfectly and they did.
Was this helpful?
Thank you for voting!
element broken at contact point
0 of 1 people found this instruction helpful.
  • MARLENE from EUGENE, OR
  • Really Easy
  • Less than 15 mins
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
Was this helpful?
Thank you for voting!
Replace Drip Pans on Stove Top
0 of 1 people found this instruction helpful.
  • Shawn from Lubbock, TX
  • Really Easy
  • Less than 15 mins
Just removed the old drip pans and then inserted new ones...pretty dog gone easy!
Was this helpful?
Thank you for voting!
burned-out six inch electric stove- top burner
0 of 1 people found this instruction helpful.
  • Harold from Gloversville, NY
  • Really Easy
  • Less than 15 mins
Removed the old and slipped in the new.No problem and it works fine.
Was this helpful?
Thank you for voting!
Change out burner bowls
0 of 1 people found this instruction helpful.
  • Carolee from Carson City, NV
  • Really Easy
  • Less than 15 mins
Took out the old ones and replaced with the new ones. Very simple task. It didn't take 5 minutes.
Was this helpful?
Thank you for voting!
Small burners would not work
0 of 1 people found this instruction helpful.
  • David from Goodyear, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
ordered parts and disassembled old burners and installed new ones. All the parts were in the box when delivered.
Helping my 80 yr old mother-in-law very happy.

Got parts in for one of her 81st birthday present she was thrilled.
Was this helpful?
Thank you for voting!
Replace old burner bowls
0 of 1 people found this instruction helpful.
  • Daniel J. from Vernon, CT
  • Really Easy
  • Less than 15 mins
It was easy to just replace the old burner bowls rather than try to clean them. The peices ordered from Parts Select were a perfect match and they arrived on a timely basis.
Was this helpful?
Thank you for voting!
original drip pans scrubbed so much-rusted....
0 of 1 people found this instruction helpful.
  • Jane from Quarryville, PA
  • Really Easy
  • Less than 15 mins
Took out the original drip pans and set in replacements which I ordered in black enamel.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.
Was this helpful?
Thank you for voting!
All Instructions for the 12561
31 - 45 of 69