My Orders
1243 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed to replace muffler
1 of 2 people
found this instruction helpful.
Using a socket wrench with extension and a T20 star socket (you can use the appropriate hex head socket also) i removed to two bolts holding the muffler on. They are right on top of the engine and very accessible. Your model may have a heat shield that needs to be removed. Once the muffler is off remove the old gasket. It may be stuck to
... Read more
the muffler or exhaust opening on the engine. It should just pry of with a little effort. I did make sure there were no gasket pieces left behind. I placed the bolts through the flange of the new muffler and then slid the new gasket over the bolts. You can use a exhaust gasket sealant just hold it place while you place the flange in place and not have to worry about gasket dropping off. I just held it until I got the flange in place. I started the bolts by hand using the socket and extension. I alternated from each bolt until I had tighted it down. You can look up torque specs. I just used my grunt meter. It is good as new. Parts were OEM replacement. Not knock off almost right parts. I got very lucky when I found this company and will use them again.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
original drip pans scrubbed so much-rusted....
0 of 1 people
found this instruction helpful.
Took out the original drip pans and set in replacements which I ordered in black enamel.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.
Other Parts Used:
Was this helpful?
Thank you for voting!
Replace Drip Pans on Stove Top
0 of 1 people
found this instruction helpful.
Just removed the old drip pans and then inserted new ones...pretty dog gone easy!
Other Parts Used:
Was this helpful?
Thank you for voting!
Change out burner bowls
0 of 1 people
found this instruction helpful.
Took out the old ones and replaced with the new ones. Very simple task. It didn't take 5 minutes.
Other Parts Used:
Was this helpful?
Thank you for voting!
Replace old burner bowls
0 of 1 people
found this instruction helpful.
It was easy to just replace the old burner bowls rather than try to clean them. The peices ordered from Parts Select were a perfect match and they arrived on a timely basis.
Other Parts Used:
Was this helpful?
Thank you for voting!
The stove's burner bowls were dirty and old and the chrome was gone where the cooking drippings had collected under the previous owner's usage.
0 of 2 people
found this instruction helpful.
We simply typed in the model of the range and several selections of replacements came up on your website. We ordered the black porcelain ones to replace the old chrome ones, thinking they might hold up better and be easier to clean. They look great and I really think they WILL be easy to wipe up. Thank you, Part Select! Patty in India
... Read more
na
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Incorrect Burner Bowls
0 of 2 people
found this instruction helpful.
For 12 years I've been suffering with the incorrect burner bowls...I love to cook and it's really irritating when your bowls don't fit correctly. Now, I am amazed at how my burners fit! Thank you! What a Blessing!
Other Parts Used:
Was this helpful?
Thank you for voting!
The burner bowls were encrusted with grease and spills.
I easily took out the old ones and put in the new ones sent by Part Select. As promised they fit perfectly. Now when my wife cooks there is no more smoke and it does not set off the smoke detector.
Other Parts Used:
Was this helpful?
Thank you for voting!