119901 Kenmore - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
none
0 of 1 people
found this instruction helpful.
-
Glenn from Canby, MN
- Really Easy
- Less than 15 mins
just insert
Other Parts Used:
Was this helpful?
Thank you for voting!
replaced drip pans
1 of 4 people
found this instruction helpful.
-
Thomas from Fall Branch, TN
- Really Easy
- Less than 15 mins
i removed the stove eye and the old drip pan. then i placed the new drip pan in and replaced the eye. the new drip pans fit way better than the ones that i took off of it.
Other Parts Used:
Was this helpful?
Thank you for voting!
Old Drip Bowls Corroded beyond Repair
0 of 1 people
found this instruction helpful.
-
Todd A from Everson, WA
- Really Easy
- Less than 15 mins
I've been to many appliance repair stores looking for White-Westinghouse Stove Parts and have been told their 'unavailable'! Then I checked PartsSelect.com- and they were listed as 'available'. The 6" & 8" Drip Bowls shipped quick and arrived packed well. The new Drip Bowls aren't as heavily made as the originals- but they are exact repla
... Read more
cements and very easy to replace. The wife is happy and with many replacement parts & how-to-videos for repair we plan on keeping this stove for another 20 years!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
rusty bowls
0 of 2 people
found this instruction helpful.
-
Monty from Kenton, OK
- Really Easy
- Less than 15 mins
very easy
Other Parts Used:
Was this helpful?
Thank you for voting!
replace burner coil connector
0 of 2 people
found this instruction helpful.
-
dicky from mcrae, AR
- Really Easy
- Less than 15 mins
-
Screw drivers
Cut the two wires approx 1 inch behind old connector and removed one screws to remove old connector, stripped approx 3/4 inch off the wires and connected them to the new wires on the new connector with wire caps and shrink wraps which came with the new connector. Replaced the old screw with the new screw and the job was completed. Be su
... Read more
re and disconnect power before starting!!
Read less
Was this helpful?
Thank you for voting!
large burners not working
0 of 2 people
found this instruction helpful.
-
Greg from Versailles, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Read instuctions first Turn breaker off to stove or unplug to be sure. Remove burner and drip pans. Remove scews holding socket in place if you are doing more than one make sure you keep in same location. Raise cook top untill supports latch in. Assemble plug it comes with two types holder compare to your plug. cut wire to old plug so yo
... Read more
u have enough wire to connect back with new. Strip wire back and place shrink tubeover wires wire nut together heat with a lighter or heat gun then do remaining plugges. place back in cover and replace scews. make sure wire are not to long to get under burner when cook top lowered. Lower cook top and clean burner plug ends with a little sandpaper to make sure they make good connection. replace pans and burner. turn on breaker or plug in stove making sure the burners come on when turned on good luck g.d.
Read less
Was this helpful?
Thank you for voting!
Intermittent heating element function
0 of 2 people
found this instruction helpful.
-
Jeffrey from Pittsburgh, PA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Instructions included with terminal block assembly. Toughest part was to strip the insulator off of the old wires on the stove. I was originally going to just purchase one but after looking at the other terminal blocks and seeing the burnt insulation and some of the wire strands, I just replaced all 4. PartSelect customer sevice was ve
... Read more
ry helpful to confirm the correct part number I needed for my stove.
Read less
Was this helpful?
Thank you for voting!
Renewed drip pans
1 of 6 people
found this instruction helpful.
-
Frank from Winter Garden, FL
- Really Easy
- Less than 15 mins
Replace the old ones with the new ones. Was VERY impressed with the quick delivery!!
Other Parts Used:
Was this helpful?
Thank you for voting!
heating elements not working
1 of 7 people
found this instruction helpful.
-
christopher from cincinnati, OH
- Easy
- Less than 15 mins
-
Pliers
prepared the parts as directions displayed, removed the heating coils and popped the hood on the range, simple curcit 2 wires in to the main harness for each coil. snip, plug and twist add heat wrap to seal the new conections and done very simple fix saved me buying another oven....for now
Was this helpful?
Thank you for voting!
Control will not work - only clock blinks
0 of 4 people
found this instruction helpful.
-
Sue from Lampasas, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Was this helpful?
Thank you for voting!
Top element not heating
-
Mary from Montgomery, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Ordered wrong part at first caused me to blow out two elements. With the help of PartSelect I was able to get the right surface block terminal and replaced both of them, then found out I had a bad switch, they got the switch within 2 days I had my stove working good again. Thanks to PartSelect. Also watched the video which was very helpf
... Read more
ul ML
Read less
Was this helpful?
Thank you for voting!
drip pans old and rusted
-
linda from decatur, AL
- Really Easy
- Less than 15 mins
unplugged the elements, removed drip pans, replaced with new drip pans. plugged back in elements. took no skills or effort. the parts were ordered on-line one afternoon and were on my doorstep the next morning. I had been unable to find drip pans that fit my stove and was thrilled that they fit and came so quickly and were reasonably pric
... Read more
ed.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Replace terminal block and burner unit.
-
James from Williamsville, VT
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very simply following the online video instructions.
Was this helpful?
Thank you for voting!
Left hinge broke in pieces
-
Marilyn from Yonkers, NY
- Really Easy
- 15 - 30 mins
-
Wrench (Adjustable)
First I read other comments here; then checked youtube.com to see if there was a video - there was! Easily removed the stove door and the storage drawer to access the spring. Removed the spring and used screwdriver to remove 2 of 3 screws - third had a nut on back which required removal of the decorative panel next to the door. After appl
... Read more
ying Liquid Wrench, was able to use vise-grip to remove last bolt. Inserted new hinge, attached the spring to hinge and stove frame then inserted the 3 screws. Reattached the decorative panel and was done. Repklaced a hinge, not a stove!!!
Read less
Was this helpful?
Thank you for voting!
Three terminal blocks burned out (disintegrated) on electric stove
-
Valentina from Riverside, CA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!!
... Read more
I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!
Read less
Was this helpful?
Thank you for voting!