1197728310 Kenmore Wall Oven - Instructions

Removed the water filter cover and then removed the water filter in place, and replaced with the new filter, replaced the cover. Repair done, less than 2 minutes.

Opened the box. Took off the end caps and popped it right into place. Easy as pie!

Removed old filter...put in new...ran water for three minutes before drinking. Easiest repair/replacement job ever!!!

No problem. Just push the button and pop out the old filter, pop in the new one, and reset the indicator by pressing and holding the "filter reset" button on the control panel.

I also needed to replace the water actuator handle on the front panel ice and water dispenser panel. That took a few more minutes to do but I wanted to share that I ordered the actuator arm from the Sears parts store at the same time that I ordered the filter from Parts Select. (parts select showed it out of stock and Sears showed it in stock).

I got notification that they were going to ship my part from Sears on the same day that the part from Parts Select arrived at my doorstep. It took about a week and a half more time to get the part from Sears and they charge more money on top of that.

Parts Select is my new parts store.

Loved the website. Easily found the part I needed. Filter received in two business days. Wow, really fast service. Replacing water filter was a piece of cake. Pulled out old filter, removed caps from new one and slid it into place. Will certainly look to this company for parts in the future.

just pushed into the ice filter slot

Removed old filter and installed new filter.

replaced water filter per instruction manual.

Push the button on the right side of the ice maker filter compartment which releases the old filter. Just pull old filter out and slide the new filter all the way in. Be sure and mark on the new filter the date that will be time to change the filter again. I ordered the filter on one day and received the filter in the mail the next day and I had not paid extra for overnight shipping.

First I read other comments here; then checked youtube.com to see if there was a video - there was! Easily removed the stove door and the storage drawer to access the spring. Removed the spring and used screwdriver to remove 2 of 3 screws - third had a nut on back which required removal of the decorative panel next to the door. After applying Liquid Wrench, was able to use vise-grip to remove last bolt. Inserted new hinge, attached the spring to hinge and stove frame then inserted the 3 screws. Reattached the decorative panel and was done. Repklaced a hinge, not a stove!!!

Replaced the water filter ( two minutes). Water not only pours evenly, but tastes great, I was so worried about finding the correct filter for the fridge. It took minutes to order online and the correct part for my model arrived. Extremely happy with my purchase.

I ordered the filter from Parts Select on 9/2/13 and it was delivered to my house on 9/5/13. You can't beat that for quick service. So then I open door to refrigrator and push the button on the lower right of the filter compartment, which is at eye level. Remove old filter. Take the caps off the terminals of the new filter and insert into compartment where the old filter was. Write the date of the filter change on the label that comes with the filter and affix to the new filter face. The filter should last six months.

Just like the instructions said. It took less than 30 seconds. Very happy I could do this myself. Thank you PartSelect.

My daughter ordered and replaced the part very easily.

take out the old....put in the new...couldn't be easier!