My Orders
1165411 Kenmore Filters & Accessories - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
switch went out
1 person
found this instruction helpful.
-
THEODORE from WINONA, MN
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
removed the two screws that hold the switch unit into the housing that sits on top of stove. Noticing the electrical connections, I secured the power to the oven by shutting off the circuit breaker. I then removed the faulty switch from + and - wire connections and cleaned and reconnected wires to the new switch and slid new unit back i
... Read more
nto upper housing and put the screws back in to hold it in place. I turned the power back on, toggled the switch, and heard the ventilation fan whirl. Piece a cake. So gald I was able to find the part. Teddy Schoewe, Winona, Mn.
Read less
Was this helpful?
Thank you for voting!
The fan switch was broken!!!!
10 of 32 people
found this instruction helpful.
-
Betty from Alameda, CA
- Difficult
- 15 - 30 mins
-
Pliers
It was difficult tighten the screws.... not enough space to
work with.
work with.
Was this helpful?
Thank you for voting!
Switch was a tad too big.
-
Terry from Schaumburg, IL
- A Bit Difficult
- 15 - 30 mins
Had to inlarge the hole, other wise the switch would bind.
Was this helpful?
Thank you for voting!