110C68133410 Kenmore Dryer - Instructions

All Instructions for the 110C68133410
1 - 11 of 11

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Catch was broken
9 of 11 people found this instruction helpful.
  • Rosemary from RILEY, MI
  • Very Easy
  • Less than 15 mins
Removed the plastic guard. Snapped the catch in place and replaced the guard
Was this helpful?
Thank you for voting!
Broken dryer door catch
9 of 11 people found this instruction helpful.
  • Preston from ETNA, OH
  • Really Easy
  • Less than 15 mins
Used the screwdriver pressed the blade against the edge of the door catch and popped it out. Put the new door catch in place and pressed it and it snapped into place. Done
Was this helpful?
Thank you for voting!
Broken door catch
3 of 3 people found this instruction helpful.
  • Christine from Virginia Beach, VA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The original door catch had broken and would no longer stay shut. Ordered the part from this site with ease. Very easy to replace the broken door catch on my Amana dryer. Tool needed was a flat head screwdriver to loosen the cover, remove broken piece and easily replace with new part. Followed the video and it was back to normal operation within minutes.
Was this helpful?
Thank you for voting!
the metal plate connecting the door catch was broken, so I ordered the part
2 of 2 people found this instruction helpful.
  • Cris from GLENDALE, CA
  • Really Easy
  • Less than 15 mins
I pushed one end of the catch on upper side the hole and when locked, I pushed the other end of the catch to the lower side to get locked. To complete, the white cover was inserted on top of the catch and done.
Was this helpful?
Thank you for voting!
door catch had crackedt
2 of 2 people found this instruction helpful.
  • stephen from tewksbury, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
took out old ,twisted in the new one it was nice to have the right part the first time!! thank-you
Was this helpful?
Thank you for voting!
door catch broke
2 of 2 people found this instruction helpful.
  • Debra from BLASDELL, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove the protective cover on door with screwdriver, pop out the old catch, snap new catch in place, replace protective cover
Was this helpful?
Thank you for voting!
Door would not stay closed.
2 of 2 people found this instruction helpful.
  • Wanda from SHELBYVILLE, KY
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Replaced door catch on dryer door. Followed video on Whirlpool website and it took less than 10 minutes. The dryer works great.
Was this helpful?
Thank you for voting!
The Dryer door would not latch. The door latch was broken and needed to be replaced.
2 of 2 people found this instruction helpful.
  • Douglas from WINCHESTER, VA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Once I received the new latch I removed the latch cover with the flat head screw driver and worked out the old latch. I then positioned the new latch and snapped in place. I then replaced the cover and shut the Dryer door. The door latched and the repair was complete.
Was this helpful?
Thank you for voting!
Catch broke
1 person found this instruction helpful.
  • John from NORTH HAVEN, CT
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed the inside part of the door from the outside door shell. Removed the broken pieces of the catch and replaced it with the new one. Screw the door back together. Did not need to remove the door from the dryer cabinet.
Was this helpful?
Thank you for voting!
broken plastic catch on dryer door
1 person found this instruction helpful.
  • Ann from Brenham, TX
  • Easy
  • 30 - 60 mins
  • Screw drivers
removed broken parts & snapped in new catch
Was this helpful?
Thank you for voting!
The plastic part on the door catch was broken
1 person found this instruction helpful.
  • Cindy from ENUMCLAW, WA
  • Easy
  • 30 - 60 mins
  • Pliers
I removed the metal piece which held the plastic "catch". There were no screws, squeeze to remove it. Then inserted the plastic part and re-inserted the metal part into the dryer door. Very simple. But even more pleasing was the easy ordering and the quick delivery of the part! Thank you so much!
Was this helpful?
Thank you for voting!
All Instructions for the 110C68133410
1 - 11 of 11