110C62442511 Kenmore Dryer - Parts

This dryer door handle is designed to facilitate smooth opening and closing of the dryer door. Measuring 5-3/4 inches by 2 inches, it features a white, smooth-surfaced finish that complements most dryer exteriors. Commonly used in compatible models, this handle replaces broken or worn components—particularly when the locking tab has snapp...Read moreed off or the door fails to close securely, causing the handle to detach repeatedly. Replacing the handle restores proper door function and user convenience. Installation is straightforward and typically requires no tools, making it a quick and effective repair.

The idler pulley wheel provides the tension for a multi-ribbed belt and helps the belt to rotate the drum. The drum will not spin if the idler pulley fails to put the correct amount of tension on the belt. The wheel is white in color and is made of plastic. If the drum will not tumble, is noisy, or will not start, you may need to replace...Read more this part. This idler pulley is a genuine OEM part. Please remember to disconnect the power to your dryer before you start your repair.

Brighten up your appliance with this easy-to-install 10-watt light bulb, perfect for dryers and refrigerators. It gives off a clear, steady light so you can easily see inside when the door is open. Whether you're replacing a bulb in your Whirlpool or another compatible brand, this one fits right in. Just twist it into place—no tools needed. For safety, make sure your appliance is turned off before swapping the bulb.

The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

If your dryer is taking longer to dry clothes or feels like it’s losing heat, the door seal might be the problem. This flexible, heat-resistant gasket wraps around the door opening to keep hot air in and cold air out. It helps your dryer work faster and more efficiently, saving energy and time. Replacing an old or cracked seal is a simple way to improve performance and avoid safety issues from air leaks.

Ensure your dryer operates smoothly with this replacement door catch, which helps keep the door firmly closed throughout each cycle. It’s compatible with various models and replaces older versions. Common signs that this part needs replacing include a door that won’t latch properly or opens unexpectedly during use. Installing a new catch is a quick fix that improves both safety and efficiency.

Sold individually.

This seal comes with the adhesive backing.

This dryer motor pulley is a genuine OEM replacement part designed for select dryer models. It connects to the motor shaft and supports the drive belt, enabling smooth rotation of the drum during operation. A worn or damaged pulley can result in squealing, grinding noises, or inefficient drum movement. Replacing the pulley can restore pro...Read moreper function and reduce noise. Always verify your appliance’s model number before purchasing to ensure compatibility. Installation may require basic tools and safety precautions, including disconnecting power before beginning the repair.

This seal comes with the adhesive backing.

This dryer start switch is a key component that completes the electrical circuit to initiate the drying cycle. Once a timer setting is selected, pressing and releasing the switch activates the dryer. Installation requires a 1/4-inch nut driver and a flathead screwdriver. To replace, first unplug the appliance, remove the rear panel and th...Read moree old switch, then install the new switch and reattach the panel. For detailed guidance, refer to the manufacturer’s installation manual.