11089675310 Kenmore Washer Dryer Combo - Parts

25 - 36 of 305

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gearcase – Part Number: 3360629
$546.62
In Stock
Gearcase
★★★★★
★★★★★
(8)
Part #3360629
This is used in your direct drive washer that has a neutral drain.
Hose Clamp – Part Number: WP285655
$15.68
In Stock
Hose Clamp
Part #WP285655
This hose clamp is sold individually.
Motor Pulley – Part Number: W10837625
$22.95
In Stock
Motor Pulley
★★★★★
★★★★★
(6)
Part #W10837625
This part is the replacement motor pulley for your dryer. The motor pulley allows the dryer belt to run straight while the dryer is operating. If your motor pulley is damaged, your dryer may not tumble, and may not start altogether. A damaged motor pulley can also damage the dryer belt, and it may need to be replaced as well. Be sure to disconnect power from the dryer before you begin this repair. This motor pulley is a genuine OEM part sourced directly from the manufacturer.
Agitator Cam Kit – Part Number: 285751
$27.15
In Stock
Agitator Cam Kit
★★★★★
★★★★★
(3)
Part #285751
This agitator cam kit contains an almost three inch white retainer and four agitator dog ears. This kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover).
Pump Retainer – Part Number: WP8546127
$15.28
In Stock
Pump Retainer
Part #WP8546127
Sold Individually.
Clutch Lining Kit – Part Number: 285790
$58.25
In Stock
Clutch Lining Kit
★★★★★
★★★★★
(5)
Part #285790
This clutch band and lining kit helps control the washer's spin cycle by regulating the transfer of power between the drive system and the wash basket. It allows the basket to gradually reach full spin speed, helping remove excess water from clothing at the end of the cycle. If the washer is spinning slowly, leaving clothes wet, making unusual noises, vibrating excessively, or not spinning at all, a worn clutch may be the cause. Replacing the clutch components with this kit can help restore proper spin performance, improve water extraction, and keep the washer operating efficiently. The kit includes the key parts needed to repair the clutch assembly and restore reliable operation.
Dryer Drum Roller Shaft Left Side – Part Number: WPW10359270
$68.10
In Stock
Dryer Drum Roller Shaft Left Side
★★★★★
★★★★★
(1)
Part #WPW10359270
Replace the shaft of your left side drum support roller with this part from Whirlpool/Kenmore. This replacement shaft is 2-7/8 inches long. It is meant for use with many of Whirlpool/Kenmore's gas and electric clothes dryers that have been manufactured since 1965. Also known as Drum Roller Shaft.
Washer Transmission Stem Seal – Part Number: WP8577376
$14.25
In Stock
Washer Transmission Stem Seal
Part #WP8577376
Sold individually.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Screw – Part Number: WP488729
$10.50
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Washer 2speed Drive Motor 60hz 120v – Part Number: WP661600
$259.48
In Stock
Washer 2speed Drive Motor 60hz 120v
★★★★★
★★★★★
(4)
Part #WP661600
This drum assembly is designed for appliances that use a direct-drive motor system, eliminating the need for belts or gearboxes. By connecting the drum directly to the motor, this configuration enhances energy efficiency and reduces operational noise. The assembly provides stable rotation for effective washing or drying performance, depending on the appliance type. It is a genuine OEM component, ensuring compatibility and durability. Please note that the cardboard packaging or insert is not included with this part. Always disconnect power before installation and consult your appliance’s manual for proper handling and fit.
Cycling Thermostat - Limit 135/155 – Part Number: WP694674
$67.05
In Stock
Cycling Thermostat - Limit 135/155
★★★★★
★★★★★
(3)
Part #WP694674
If your dryer isn’t heating properly, this adjustable thermostat kit could be the solution. It helps keep the dryer at the right temperature by turning the heat on and off as needed. You can set it anywhere between 135°F and 155°F, and it kicks the heat back on when the temperature drops by 20°F. The kit comes with everything you need—thermostat, jumper wires, and wire nuts—and is a great fix for dryers that aren’t warming up like they should.
25 - 36 of 305