11081664310 Kenmore Washer - Parts

13 - 24 of 173

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Front Leveling Foot – Part Number: WPW10001130
$9.85
In Stock
Leveling Spring – Part Number: 8316845
$15.00
In Stock
Leveling Spring
★★★★★
★★★★★
(2)
Part #8316845
This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.
Air Conditioner Cover Screw – Part Number: WP308685
$10.95
In Stock
Air Conditioner Cover Screw
Part #WP308685
Sold individually.
Lid Switch – Part Number: W10820036
$33.28
In Stock
Lid Switch
★★★★★
★★★★★
(7)
Part #W10820036
Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
Washer Hose Clamp – Part Number: WP596669
$11.52
In Stock
Washer Hose Clamp
Part #WP596669
Suspension Spring Retainer – Part Number: WPW10145155
$9.85
In Stock
Suspension Spring Retainer
★★★★★
★★★★★
(2)
Part #WPW10145155
This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.
Suspension Pads - Package of 3 – Part Number: 285219
$35.15
In Stock
Suspension Pads - Package of 3
Part #285219
This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.
Gearcase – Part Number: 3360629
$546.62
In Stock
Gearcase
★★★★★
★★★★★
(8)
Part #3360629
This is used in your direct drive washer that has a neutral drain.
Inner Tub Filter Plug Kit – Part Number: 285868
$39.55
In Stock
Inner Tub Filter Plug Kit
★★★★★
★★★★★
(4)
Part #285868
Kit contains 4 plugs - replaces the lint filter that goes under spin basket. The filter under the spin basket is no longer required. Replaces round filter assembly.
Washer Timer Knob – Part Number: WP3362624
$43.95
In Stock
Washer Timer Knob
★★★★★
★★★★★
(5)
Part #WP3362624
This sleek black knob with a chrome center makes it easy to choose your wash settings. If your washer’s knob is cracked or won’t turn properly, this replacement helps restore smooth control. It’s built to last and fits right onto the timer post—no tools needed. Just pop it on and get back to hassle-free laundry days.
Tub-to-Pump Hose Kit – Part Number: 285871
$31.75
In Stock
Tub-to-Pump Hose Kit
★★★★★
★★★★★
(7)
Part #285871
This kit comes with the clamps.
Clutch Lining Kit – Part Number: 285790
$58.25
In Stock
Clutch Lining Kit
★★★★★
★★★★★
(5)
Part #285790
This clutch band and lining kit helps control the washer's spin cycle by regulating the transfer of power between the drive system and the wash basket. It allows the basket to gradually reach full spin speed, helping remove excess water from clothing at the end of the cycle. If the washer is spinning slowly, leaving clothes wet, making unusual noises, vibrating excessively, or not spinning at all, a worn clutch may be the cause. Replacing the clutch components with this kit can help restore proper spin performance, improve water extraction, and keep the washer operating efficiently. The kit includes the key parts needed to repair the clutch assembly and restore reliable operation.
13 - 24 of 173