- Home
- 11081476830
- Instructions
11081476830 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
screeching sound along with small amount of water coming out to fill machine
0 of 1 people
found this instruction helpful.
-
JAVIER from LOS ANGELES, CA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I notice a screetching sound started and as time went on the water that flowed out to fill water drum was not working properly, unplugged washing machine electrical cord from outlet. disconnected water hoses, removed screws from control panel, pulled out front cover off wachine machine to access water valve, removed by unscrewing 2 screws
... Read more
, placed bracket on new part(placed over valve and pushed bracket up to slide and align srew to tightenbracket), put everything back in reverse order, helpfull video on video web site for visual
Read less
Was this helpful?
Thank you for voting!
No hot water
0 of 1 people
found this instruction helpful.
-
Alan from Brooklyn, NY
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I followed the great step by step video instructions that you provided. The only difficulty was getting the plugs off the Water Inlet Valve. I had to use pliers (gently) to pull the two plugs off. I would highly recommend PartSelect to my friends.
Was this helpful?
Thank you for voting!
water was over flowing
0 of 1 people
found this instruction helpful.
-
mark from Sheridan, CO
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers
looked on the find a part by s symptom. found the part,moved the washer took off the back.took 2 screws off of the top of the machine/controls.lifted the top.replace the water inlet valve.put it back together.easy repair.
Was this helpful?
Thank you for voting!
water inlet valve was cracked on back of washing machine
0 of 1 people
found this instruction helpful.
-
Marco from Somerville, MA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
i removed all screws for back of washer and removed top washer controls. then removed the valves and replaced with new one. reinstalled back in reverse order.really easy job. you just have to pay attention how you took it apart and study how it works , thanks!
Was this helpful?
Thank you for voting!
water inlet valve would not shut off because of warn out part
0 of 1 people
found this instruction helpful.
-
walter from palmetto, FL
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
Take top of washing machine off. Turn spikets off and remove hot and cold inlet hoses. Remove one screw holding part in place. Reach from front and take valve out. Unplug wiring harnesses. Reinstall the same way I took it off.
Was this helpful?
Thank you for voting!
Water would not shut off plus long time filling
0 of 1 people
found this instruction helpful.
-
Kenneth from Brockton, MA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set
I simply watched the video that PartSelect has online and it was a big help although my washer was a little different it still gave me the general idea on how to remove the casing. Great website! Thanks PartSelect!
Was this helpful?
Thank you for voting!
Had no hot water flowing into the washer.
0 of 1 people
found this instruction helpful.
-
Valan from Arlington, TX
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I just followed the instructions from a previous customer. Worked perfectly.
Was this helpful?
Thank you for voting!
Dryer would not activate
2 of 7 people
found this instruction helpful.
-
Andris from Sands Point, NY
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set
>removed 2 screws connecting the vent filter to the top lid of the unit (just in front of removable filter).
>Losing two screws at the back of the machine, just below control panel to allow free movement of the top lid on its hinges.
>Raise top lid & supported open.
>Now have free access to door switch (inside , front right ... Read more fastened to front panel)
>removed the old switch
>fasten new switch (required new wire connector which was supplied with package) to existing wiring and replaced.
>Works perfectly!
>Losing two screws at the back of the machine, just below control panel to allow free movement of the top lid on its hinges.
>Raise top lid & supported open.
>Now have free access to door switch (inside , front right ... Read more fastened to front panel)
>removed the old switch
>fasten new switch (required new wire connector which was supplied with package) to existing wiring and replaced.
>Works perfectly!
Read less
Was this helpful?
Thank you for voting!
Water inlet valve would not shut off on cold side.
0 of 1 people
found this instruction helpful.
-
George from Edgerton, WI
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I removed the faulty valve after unplugging the AC cord. Two screws, the two water hoses were removed, and the electrical connections were unplugged. The old valve could then be rotated so that the clamp on the fill tube could be loosened and the tube pulled off the valve.
The new valve body seemed to be an exact replacement, but t ... Read more he mounting bracked was slightly different and required drilling two new screw-mounting holes; an easy job.
Before securing the mounting plate to the machine, the fill tube and clamp were reattached, and the electrical connectors plugged in. After connecting the supply hoses and plugging in the AC cord, the machine filled with water properly and everything seemed to be back to normal.
I might have been able to use the original mounting plate, but it had been taken to a different location which was too far away to easily retrieve.
The new valve body seemed to be an exact replacement, but t ... Read more he mounting bracked was slightly different and required drilling two new screw-mounting holes; an easy job.
Before securing the mounting plate to the machine, the fill tube and clamp were reattached, and the electrical connectors plugged in. After connecting the supply hoses and plugging in the AC cord, the machine filled with water properly and everything seemed to be back to normal.
I might have been able to use the original mounting plate, but it had been taken to a different location which was too far away to easily retrieve.
Read less
Was this helpful?
Thank you for voting!
not cold water
0 of 1 people
found this instruction helpful.
-
PEDRO from DAVIE, FL
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
removed top panel and back panel
and then disconect the two wire fromm water inlet
fallow by removing screws.disconect water hose
then put back new part make sure i have all same conected as original put back panel top and back
conected hose for water back and electric .
then i turned 0n cold water perfect work ... Read more hot water perfect warm perfect. problem fixed.
thanks. pedro
and then disconect the two wire fromm water inlet
fallow by removing screws.disconect water hose
then put back new part make sure i have all same conected as original put back panel top and back
conected hose for water back and electric .
then i turned 0n cold water perfect work ... Read more hot water perfect warm perfect. problem fixed.
thanks. pedro
Read less
Was this helpful?
Thank you for voting!
Hot water would only trickle in.
0 of 1 people
found this instruction helpful.
-
Helen from Louisville, KY
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
I wish I could be more specific, but I had a bit of trouble getting the back off the washer. I removed the control panel on the top of the machine and that allowed me to get to the two clips that secured the back onto the unit. The I removed additional screws on the back until I was able to pull the back away from the frame on the side wh
... Read more
ere the valve was installed. after loosening the screws that held the valve to the back panel I was able to reach in and pull it out of the side. Once that was done, the rest was a breeze. I clipped the hose on the original valve and re-attached it to the new part. Then it was just a matter of reassembling and that went much, much faster than the disassembling. I reattached the water lines, plugged in the washer and it worked like a charm. I was very pleased with the whole thing. Also, I paid for standard freight, but received the part the following day after placing the order. Sweet.
Read less
Was this helpful?
Thank you for voting!
cold water solenoid would not open much
0 of 1 people
found this instruction helpful.
-
Dave from Kingsport, TN
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
Unplugged the washer and pulled out from wall as far as hoses would permit. Removed and drained both supply hoses. Removed drain hose and drained. Any water left in the tub will drain here so it's best to make sure it's drained prior to repair. Used pliers to hold the hose clamp and removed. Took screws out of drain hose interface pl
... Read more
ate and pulled out far enough to disconnect it from the internal hose.
Removed the two front screws of the control console. removed the two top hinge screws on the back. Removed four screws at the bottom of the rear access panel. Had to lift unclip several clamps holding the level hose in the control console and a cable connector. Unclipped various clips in the back panel to free it from wire bundle and such. Lifted the back panel up off of the clips located at the rear base of the control panel.
Removed two screws to free the solenoid assembly from the back panel. Unplugged the connectors to the original solenoid assembly. Disconnected the internal hose from it. Installed screw and plate supplied with the replacement solenoid to configure it with the same orientation as the original. Connected the internal hose and electrical connectors. Reassembled the back in reverse order as diassembled.
Removed the two front screws of the control console. removed the two top hinge screws on the back. Removed four screws at the bottom of the rear access panel. Had to lift unclip several clamps holding the level hose in the control console and a cable connector. Unclipped various clips in the back panel to free it from wire bundle and such. Lifted the back panel up off of the clips located at the rear base of the control panel.
Removed two screws to free the solenoid assembly from the back panel. Unplugged the connectors to the original solenoid assembly. Disconnected the internal hose from it. Installed screw and plate supplied with the replacement solenoid to configure it with the same orientation as the original. Connected the internal hose and electrical connectors. Reassembled the back in reverse order as diassembled.
Read less
Was this helpful?
Thank you for voting!
Cold water inlet valve went out
0 of 1 people
found this instruction helpful.
-
Sandra from Ash Flat, AR
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
My son did the repair. Thank God for Sons who know how to repair things. Worst thing was figuring out how to get the back off, top where dials are had to come off too. the rest was easy according to him..
Was this helpful?
Thank you for voting!
water inlet valve not let water in washer
0 of 1 people
found this instruction helpful.
-
Ronald from prince george, VA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
removed the two screw that hold the inlet valve take hose of .the first was takeing the back of than the hoses from back hose on bottom of machine.
Was this helpful?
Thank you for voting!
Wahing machine overflowed
0 of 1 people
found this instruction helpful.
-
Bruce from Englewood, CO
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Opening the washing machine, and removal and replacement of the water inlet valve were both trivially easy. However, getting the cabinet back into place was a bit tricky, only because I did it by myself. It was surprising how flexible and flippy-floppy the cabinet became when free of the structure of the machine. It would have been a h
... Read more
uge help to have had a buddy over to just help place the back corners of the cabinet into place. That would have made the whole job totally easy.
Read less
Was this helpful?
Thank you for voting!