1107992310 Kenmore Dryer - Parts

1 - 12 of 71

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Catch Kit – Part Number: 279570
$10.58
In Stock
Door Catch Kit
★★★★★
★★★★★
(87)
Part #279570
This kit contains two door strikes, and three door catches to service dryer doors that have one or two catches.
Multi Rib Belt – Part Number: 661570
$34.28
In Stock
Multi Rib Belt
★★★★★
★★★★★
(52)
Part #661570
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium" difficulty to install. Refer to your model number and user manual to ensure this part is correct for you. To complete this repair you will need a Phillips screwdriver, 1/4 inch nut driver, a putty knife, and a pair of needle nose pliers. Ensure you disconnect your power to the dryer before beginning this repair, which should take between 30 and 60 minutes maximum to complete.
M Series New Style Coil Kit – Part Number: 279834
$36.25
In Stock
M Series New Style Coil Kit
★★★★★
★★★★★
(43)
Part #279834
This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.
Leveling Foot – Part Number: 49621
$10.95
In Stock
Igniter Kit – Part Number: 279311
$51.90
In Stock
Igniter Kit
★★★★★
★★★★★
(13)
Part #279311
This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 4" wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers.
Motor Pulley - 60  Hz. – Part Number: WP8066184
$51.59
In Stock
Motor Pulley - 60 Hz.
★★★★★
★★★★★
(4)
Part #WP8066184
This dryer motor pulley is a genuine OEM replacement part designed for select dryer models. It connects to the motor shaft and supports the drive belt, enabling smooth rotation of the drum during operation. A worn or damaged pulley can result in squealing, grinding noises, or inefficient drum movement. Replacing the pulley can restore proper function and reduce noise. Always verify your appliance’s model number before purchasing to ensure compatibility. Installation may require basic tools and safety precautions, including disconnecting power before beginning the repair.
Side and Bottom Vent Kit – Part Number: W10470674
$98.48
In Stock
Side and Bottom Vent Kit
★★★★★
★★★★★
(1)
Part #W10470674
This kit is used for the bottom and side exhaust. The kit includes both the straight and elbow vent.
Screw – Part Number: WP488729
$10.50
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Dryer Retainer Spring Clip – Part Number: WP3388229
$14.67
In Stock
Dryer Retainer Spring Clip
Part #WP3388229
Sold Individually.
Dryer Spring – Part Number: WPW10446781
$30.22
In Stock
Dryer Spring
★★★★★
★★★★★
(1)
Part #WPW10446781
Is your clothes dryer acting up? Don't worry. We've got the solution you've been looking for - the Whirlpool Dryer Idler Spring, a genuine OEM part compatible with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef clothes dryers. Why is this small-but-mighty part so crucial? It's simple. This spring works tirelessly in the background, providing proper tension to the idler pulley which assists in smoothly turning the drum belt. Imagine it as the unsung hero of your dryer, helping it run efficiently and preventing frustrating interruptions during your laundry cycle. What's unique about the Whirlpool Dryer Idler Spring? It's created specifically for the idler pulley arm in dryers, ensuring premium performance and helping increase the lifespan of your appliance. Plus, it's straightforward to install - just remember to unplug your dryer first, and wear work gloves for safety. Before you order, please do a quick check to make sure the idler spring is the right fit for your model, as sizes and shapes might slightly vary. By choosing the Whirlpool Dryer Idler Spring, you're on the way to getting your dryer back to working in top-notch condition, just like when it was brand new.
Door Switch and Actuator Kit – Part Number: 279782
$69.25
In Stock
Door Switch and Actuator Kit
★★★★★
★★★★★
(1)
Part #279782
This part recognizes whether the door is open or closed.
Idler Retainer – Part Number: WP3389420
$10.95
In Stock
Idler Retainer
Part #WP3389420
Sold individually.
1 - 12 of 71