110702-310 Briggs and Stratton Engine - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plug-oil Drain
Part #691680
This is an authentic OEM component from Briggs & Stratton. The oil drain plug is made for use with many small engines. The metal plug is often fastened into the crankcase cover, and is removed to drain the oil as needed. A hex key or Allen wrench is necessary for the removal and replacement. The oil drain plug is sold individually.
Screw
Part #691660
This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to secure the muffler deflector or to secure the starter clutch to the flywheel. This item is available as an individual replacement part.
Pin-starter Grip
Part #230228S
This is an original Briggs & Stratton replacement part. The starter grip pin is commonly found in machines with small engines, such as snowthrowers, tillers, and generators. This part is made of metal, and is used to help secure the starter grip on the starter rope. No tools are required when replacing this item. Simply remove the old part and insert the new one in its place. This part is sold individually.
Screw
Part #690661
The metal screw attaches to the muff guard bracket. It is a genuine replacement part sourced from the original manufacturer for use with blowers, engines, generators, pressure washers, snowblowers, and vacuums made by Briggs & Stratton, Toro, and Lawn Boy. This item is available as an individual replacement part. When replacing this screw a wrench will be needed. It will need to be replaced if it strips or breaks.
Wire-stop
Part #398808
This is an authentic OEM part from Briggs and Stratton and Toro for use with garden equipment engines. The stop wire connects the ignition coil to the stop switch to ground the spark voltage to the engine block when you release the bail control bar. This part is sold individually. The tool that you will need to replace the stop wire is pliers.
Rod-connecting
Part #490566
This is an OEM replacement part sourced directly from the manufacturer. The rod-connecting is constructed of high-quality metal and plastic parts, and is compatible with over 150 lawn and garden engines. In general, the rod-connecting pushes the crankshaft for the engine to perform. It is recommended to refer to the manual and diagrams fo...Read morer further repair instructions. This part is sold individually. A wrench and a screwdriver are needed to make the replacement. (Standard) Used Before Code Date 97011300.
Read less
Screw
Part #692523
This part is an OEM sourced directly from the manufacturer for use in Briggs & Stratton engines and Toro lawn mowers. The air cleaner screw attaches to the air cleaner. It may require a wrench during installation. Over time this screw may become stripped or broken and will need to be replaced. Keep in mind this part is made of metal and is sold individually.
Hose-vacuum
Part #791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually ...Read morerequiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.
Read less
Kit-bushing/seal
Part #796961
This is sold as a kit that contains the bushing and the seal. These are genuine replacement parts sourced from the original manufacturer for use with engines, snowthrowers, lawn mowers, and blower-vacuums made by Briggs & Stratton and Toro. When replacing these items a set of pliers might be required during the installation process. They are made of metal and plastic and will require replacing if they become broken.
Engine Screw
Part #692198
This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vi...Read morebration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.
Read less
Replacement 675 Series Vertica
Part #104M02-0197-F1
Redesigned from the ground up, EXi Series Engines are equipped with the best of everything we have to offer. With the ReadyStart Starting System there is no prime, no choke, no worries-just pull for power. EXi Series is the first walk-behind mower engine featuring Just Check and Add so you will never need an oil change-ever. Powerful, dur...Read moreable, easy to maneuver and easy to maintain, EXi Engine Series. Its engines made easy.
Read less
Spring-Governor
Part #261034