1106909 Kenmore Washer Dryer Combo - Instructions

All Instructions for the 1106909
46 - 60 of 182

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer would not start.
2 of 3 people found this instruction helpful.
  • Victoria from Roslyn Heights, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My dryer is 35 years old and thought this was it, but I googled the question and found out it was the door switch. Orderd the part and received it very fast and didn't want to wait for my husband to come home so I went on you tube and found a video how to open dryer and change switch. I did it in about 30 min. and yes it is now perfect ag ain. No problems. I just unscrewed the old switch and put the new one in. Maybe I'll get another 35 years out of this machine. :o) Thanks for making it so easy.
Was this helpful?
Thank you for voting!
water wouldn't run out of washer
4 of 9 people found this instruction helpful.
  • James from Richmond, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Two screws holding top, unhook wire conector. remove cabinet,replace switch. Reassemble.
Was this helpful?
Thank you for voting!
Won't pump out the water
1 person found this instruction helpful.
  • Victor from NORFOLK, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Order the part and put the new part on and put the washing machine cabinet back on and check the washer for the water filled up and then it's starting to go on the spin cycles.
Was this helpful?
Thank you for voting!
door catch broke therefore dryer door would not close
1 person found this instruction helpful.
  • vernette from sprague, WA
  • Really Easy
  • Less than 15 mins
just put the new part in the door---sooo easy! THANK YOU!
Was this helpful?
Thank you for voting!
dryer door won't stay shut
2 of 4 people found this instruction helpful.
  • Diana from Canfield, OH
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
I replaced the male end first hoping that a change in the female part would not be needed. Unfortunately no. I used needle nosed pliers to pry the male part out and pushed the new part in. The female part of the door catch was more difficult. I didn't do it in "textbook" form, but got the job done with pliers and a screwdriver. Worth ever y penny to fix correctly instead of rigging it. Do it!
Was this helpful?
Thank you for voting!
door latch broke
1 person found this instruction helpful.
  • Debra from Oakland, NJ
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Pop out the old latch and replaced with a new one
Was this helpful?
Thank you for voting!
catch was missing to close dryer door
2 of 4 people found this instruction helpful.
  • DONNA from SAN LORENZO, CA
  • Really Easy
  • Less than 15 mins
The only thing I had to do was hammer the catch inside the square fitting and presto it was done. It took me less than 3 mins. I thought I might of needed instructions, but it was really simple. Even a guy can do it. (smile)
Was this helpful?
Thank you for voting!
Broken door switch
2 of 4 people found this instruction helpful.
  • john from el paso, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
I took out the 2 screws that are located on the top of dryer under the lint filter door. Popped up the whole top of dryer. Opened the dryer door to unscrew the 2 door switch screws. Took off the old broken door switch through the open dryer top and before replacing the new door switch completely I tested it by turning the dryer on and pressing the new switch against the button activator 2 find out if it works. When it did, I carefully put the door switch back so the dryer door can activate it properly and screwed in the 2 screws. Finally, I put the dryer top back down & fastened the last 2 screws under the lint filter door.
Was this helpful?
Thank you for voting!
Dryer door would not stay closed
1 person found this instruction helpful.
  • Gregg from St. Augustine, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After removing front door panel (2 screws) I removed the old latch catch and replace with the new part. 4 minutes later, the door was back together, the dryer was running and the door was staying closed.
Was this helpful?
Thank you for voting!
The door whould not close enough for the dryer to work.
1 person found this instruction helpful.
  • Frank from Union Beach, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Got my parts very quickly.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Was this helpful?
Thank you for voting!
dryer wouldn't turn on
1 person found this instruction helpful.
  • Kim from Northridge, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the two screws on the top by the lint catcher. Then, per information from this website, I pried up the top. I reached down into the dryer and removed the two screws on the broken door switch and replaced it with the new part. I am a recently widowed, 55 year old and was thrilled to find good advice, information and instructions on your website!! Simple as could be!
Was this helpful?
Thank you for voting!
dryer door wouldn't catch, catch was broken
1 person found this instruction helpful.
  • Theodore from Tyler, TX
  • Really Easy
  • Less than 15 mins
took the cstch reciever out, with my fingers, pushed the new one in, snap lock fit.......couldn't be better, like repairing a model T ford.......
Was this helpful?
Thank you for voting!
broken door catch
2 of 4 people found this instruction helpful.
  • Michael from Goddard, KS
  • Really Easy
  • Less than 15 mins
the part fit perfectly, it just snaped right into place.
Was this helpful?
Thank you for voting!
Would not drain
1 person found this instruction helpful.
  • Robert from SANDWICH, IL
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Replaced lid switch, but problem still continued.
Was this helpful?
Thank you for voting!
door would stay closed
1 person found this instruction helpful.
  • william from KILLEEN, TX
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
just replaced parys
Was this helpful?
Thank you for voting!
All Instructions for the 1106909
46 - 60 of 182