11066712693 Kenmore Dryer - Instructions

The dryer would dry the clothes fine and run through heat cycles and cool down. The timer would also run down, it just would stop even thought the heat stopped. To repair, I took the back off the timer portion of the dryer. At first I panicked. I did not see any part that looked like the new one I just ordered. I searched the internet and found that the original part looked like a black plastic loop with a black and orange wire connected to it. The part I got was the new design. Then I couldn't figure out if it mattered which end I hooked to the black wire. Another internet search showed it doesn't matter which way current flows through a resistor, so it didn't matter. Hooking in the new part was very easy. The time it took to get the information to identify the part, and determine if it matter which end to hook up to which wire took the longest. I would recommend PartSelect put a picture of the old style right beside the picture of the new style. Also would like them to make clear it doesn't matter which direction the Timer Power Resistor went in.

Even with the power left on, I used some insulating pliers and carefully pulled the 4 wires off what I thought might be the problem switch.
It was not the problem. They dryer still does not run. Something else

Received the new lint removal from the box and install it easily

Removed old filter, replaced with new.

it didnt work first step though im not a pro so i really dont know whats wrong its worked in the past but not this time i actually tried
to repair mine and a friends that conked out the same week. NO GOOD with both new start switches. one was a push and the other a turn. bummer !!

It was very easy to install the new parts successfully thanku parts select I will always keep using your business the representative was so helpful and understanding my problem I wish I could remember his name he was outstanding and a 100 thumbs up to him

after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!

Simply removed old dryer lint collector and installed the new one.

Easily installed lint filter for my 25 yr old dryer Thanks

Just slide out lint remover and inserted new one. Very easy

There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.

Fast efficient delivery from Parts Select.com.

No need to publish this I'm sure.

removed the old damaged filter and replaced with the new one

Removed old filter and replaced with the new one.

Placed lint filter in opening and pushed!

received part 4 days after order. very pleased about that! Local Sears Service center was out of stock.

carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.