Models > 11065202311 > Instructions

11065202311 Kenmore Dryer - Instructions

All Instructions for the 11065202311
16 - 30 of 35
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer was not heating and sometimes would not start at all
Unplugged dryer
Removed back
Removed knob and screw from front and 2 screws from the timer in the back unplugged one wire at a time and replaced one at a time.
Dryer working great.
Parts Used:
Timer
  • Cindy from GATES, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken lint screen
Exact part needed, fit exactly like original.
Parts Used:
Lint Filter
  • Patricia from BUTLER, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Corner of old lint filter screen broke away from its frame.
Went on-line Chat and described my problem to a very professional and patient representative who requested the necessary information needed to replace my filter. Note: Due to the age of the my dryer, Sears no longer had a replacement. I'm thankful that this site was able to accomodate my need.
The repair, or should I say replacement, was as simple as pulling out the old filter and replacing it with new. Only tools, my two hands.
Parts Used:
Lint Filter
  • Mary Y from ROCKVILLE CTR, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
THE FILTER SCREEN MY MY KENMORE DRYER WAS GETTING RAGGED AND SHARP AS IT PULLED AWAY FROM THE FRAMEWORK. I KEPT CUTTING MYSELF PLUS WAS CONCERNED THAT SOME OF THE LINT WAS WAS NOT BEING FILTERED OUT.
IT WAS EASY, TOOK OUT THE OLD ONE AND PUT IN THE NEW ONE!! ANY ONE COULD DO IT.
Parts Used:
Lint Filter
  • Janet A. from NACHES, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRYER RUNS BUT DOES NOT GET HOT
OPENED REAR OF DRYER TOP PANEL, TESTED FOR CONTINUITY ON TIMER, ALL TEMP SENSORS AND HEATER COIL WITH MULTI-MEETER AS DESCRIBED IN ONLINE YOUTUBE VIDEO FOR WHIRLPOOL DRYERS. TIMER TESTED BAD AND REPLACED TIMER. EASY TO UNSCREW AND UNPLUG.
Parts Used:
Timer
  • JOE from AQUEBOGUE, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
TIMER WENT BAD AND KNOB BROKE OFF
I REMOVED THE OLD TIMER AND INSTALLED THE NEW ONE. ALL I NEEDED WAS A 3/8 SOCKET AND IT TOOK LESS THAN 15 MINUTES. I USUALLY CANNOT FIX ANYTHING AND THIS WAS VERY SIMPLE AND THE VIDEO SHOWED ME EXACTLY WHAT TO DO. THE PART IS WORKING OK SO FAR.
Parts Used:
Timer
  • Andrew from MANAHAWKIN, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint screen damaged . Orordered part but did not receive it. Instead received various parts to repair clothe washer.
Item not repaired as did not receive my order. I did call the company and they said they would credit my card. Neither they nor the company the wrong order came from seemed interested in my efforts to return the wrong order. I feel this incredibly wasteful,. I would not order from a company with this attitude
Parts Used:
Lint Filter
  • Marsha from SEARCY, AR
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem
My son did the repair and said it was so easy!
Parts Used:
Timer
  • Yvette Joan from DUSON, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Side of lint filter (screen) cracked and broke off.
Pulled the old lint filter out and threw it in the trash. Slid the new filter in and it was all done. Doesn't take a genius to do this repair. My old dryer a sears/kenmore is over 40 years old and the lint filter fit perfect. (MF part number w10874409)
Parts Used:
Lint Filter
  • Charles from Seneca, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle on old dryer screen had broken off
Removed old screen. Placed in new screen.
Parts Used:
Lint Filter
  • Bernette from LONG BEACH, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken
It fit like a glove. Just put it right in.
Parts Used:
Lint Filter
  • Marianne from OCALA, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy
Took the back off with nut driver and took out defective timer. Then put in new one.
Parts Used:
Timer
  • Patricia from PARADISE, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace the lint filter
took out the old filter and put in the new lint filter...it was a snug fit.
Parts Used:
Lint Filter
  • James from Bronx, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
no heat after 20 min.
removed top plate on rear of dryer. removed timer and replaced wires one at a time and new timer
Parts Used:
Timer
  • June from Hinsdale, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Timer on dryer wasn't working properly...shut off to soon
Easy as pie! Unscrewed old timer, replaced new timer, then removed the wires from the old and applied to the new! Replaced the cover and done! Works like a charm!
Parts Used:
Timer
  • Denise from Surfside Beach, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 11065202311
16 - 30 of 35