11031312021 Kenmore Washer - Parts

This washplate is for washers and turns back and forth at the bottom of the spin basket to circulate the wash load through the water.

This short stainless steel bolt has a 10-32 thread, a length of about 0.276 inch, and a six-lobe drive. Its exact job depends on the appliance, so use the model diagram to find where it belongs. A bolt with the same width but a different length may damage the part beneath it or fail to hold. Disconnect appliance power before service and k...Read moreeep removed hardware organized. Use the correct driver bit, start the bolt by hand, and stop if it binds. Tighten it only enough to secure the part without stripping the threads.