1102702 Kenmore Washer - Overview

Models starting with 1102702

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Washing Machine Suspension Rod Kit – Part Number: W10780048
$87.93
In Stock
Washing Machine Suspension Rod Kit
★★★★★
★★★★★
(60)
Part #W10780048
This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vibrates excessively, replacing the suspension rods may resolve the issue. Installation requires safety precautions, such as unplugging the appliance and wearing work gloves.
Washer Drive Pulley – Part Number: W10721967
$53.48
In Stock
Washer Drive Pulley
★★★★★
★★★★★
(20)
Part #W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the basket. The kit includes everything you need—clutch parts, pulley, gear, and more—but make sure it fits your model before ordering. It’s a simple repair that can get your washer back to working like new.
Washer Washer – Part Number: WP3949550
$17.26
In Stock
Washer Washer
★★★★★
★★★★★
(1)
Part #WP3949550
This part goes on the agitator retaining bolt.
Washer Drain Hose – Part Number: W11244231
$37.25
In Stock
Washer Drain Hose
★★★★★
★★★★★
(4)
Part #W11244231
The drain hose carries used water from the washer to your house drain.
Hose Clamp – Part Number: WP285655
$15.68
In Stock
Hose Clamp
Part #WP285655
This hose clamp is sold individually.
Lid Latch Strike – Part Number: WPW10240513
$48.35
In Stock
Lid Latch Strike
★★★★★
★★★★★
(3)
Part #WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, your washer door may not close properly and you may not be able to run your washer. The latch is found under the lid and can be screwed out and replaced. You will need a Phillips-head screwdriver for this repair. This part is sold individually and is and OEM part from the manufacturer.
Drain Pump - 120V 60Hz – Part Number: WPW10276397
$162.76
In Stock
Drain Pump - 120V 60Hz
★★★★★
★★★★★
(4)
Part #WPW10276397
This washing machine drain pump is a key component responsible for removing water from the tub during the drain cycle. Designed for select top-load washers, it ensures efficient water expulsion and supports proper cycle completion. Constructed from durable materials, the pump assembly includes a motor that activates during the drain phase, helping to prevent water retention and potential overflow. It is commonly replaced when the washer fails to drain, produces unusual noises, or leaks water. Compatible with models from Whirlpool and associated brands such as Maytag, Kenmore, and KitchenAid, this part should be installed with the appliance unplugged and verified for model compatibility prior to purchase.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Leveling Leg with Foot – Part Number: W10862938
$25.12
In Stock
Leveling Leg with Foot
Part #W10862938
Sold individually.
Washplate Bolt – Part Number: W10772621
$11.61
In Stock
Washplate Bolt
Part #W10772621
Sold individually.
Washer Latch – Part Number: WPW10482836
$138.62
In Stock
Washer Latch
★★★★★
★★★★★
(1)
Part #WPW10482836
This part is the replacement lid latch or latch assembly for your top-load washer. It contains the latch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The lid latch holds your washer door closed and allows the washer to run its cycle. If the lid latch is damaged, your washer door may not close properly. Additionally, the latch will not send the signal to the washer that the door is latched, and therefore the washer won’t run. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Common Symptoms of models starting with 1102702

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Violent shacking in spin mode.
189 of 230 people found this instruction helpful.
  • Terry from Homosassa, FL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Watched a video on the internet.
Was this helpful?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 108 people found this instruction helpful.
  • David from BLOOMINGTON, IN
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Over shaking and knocking on the side
25 of 28 people found this instruction helpful.
  • Alain.m from HARLINGEN, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Socket set
Went on u tube saw different video to How disassemble the top to have access to the rod. Changing one by one those rod I was in need of my wife to hold the cover while I was changing the rod.... order for suspension rod kit. Reassemble the top by sliding the cover and to snap. Screw back the panel. And it solve the problem. My wife was r eally happy so me. It can be done by anybody but first go on the internet to get a idea.
Was this helpful?
Thank you for voting!