All Installation Instructions for Kenmore Washer 11026132413

No drain

Take the old one out and put a new one in

Parts Used:

Water-Pump

Hoa from Greer, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

no water to washer

a couple of issues to get valve out and off , 15 min. install and top back on!!!

Parts Used:

Water Inlet Valve

Donald from LINN CREEK, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The wash plate cap was broken and had to be replaced.

I used a small flat head screwdriver inserted into slots just under the cap and pried off the cap. The cap should come off very easy.
Replace with the new cap.

Parts Used:

CAP

norvin from SOMERSET, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Replaced the suspension springs

The video was excellent in what needed to be accomplished. However it showed reaching inside the tub with vise grips to grab the old spring. This worked fine for removing them but the installation of the new spring did not allow my hand and vise grip to secure the new spring and pull it up and insert it into the retainer. I found that by taking a cord and putting it through the socket and retainer allowed me to pull straight up and seat it in the retainer a lot easier.

Parts Used:

Suspension Rod Kit

Dave from EUSTIS, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Cold water stopped working

Pried open the top of the machine. Used a putty knife. This was the hardest part of the job. Take your time. Took off upper plate of the back of machine, to free the value. Unplugged the power wires from the old valve and unscrewed it. Put in the new one and reversed processes. Easy peezy. Great deal on part. Saved hundreds of dollars doing it myself

Parts Used:

Water Inlet Valve

Martin from Jupiter, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable)

1 person found this instruction helpful.

Was this instruction helpful to you?

the impellar mechanism wore out so stopped aggitating

Popped the cap , used a socket to unscrew the bolt (it was stripped so ended up having to cut off bolt) Took off old impellar and replaced, installed a new bolt, replaced Cap and it was fixed.

Parts Used:

Washer Washplate Screw

Stephanie from INDEPENDENCE, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Broken hinge pin.

Removed broken hinge, replaced with new.

Parts Used:

Washer Hinge

Kevin from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Both outside door handles turned very beige

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you

Parts Used:

Spray Paint - 12 oz. - White

Howard from Boynton Beach, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

23 of 72 people found this instruction helpful.

Was this instruction helpful to you?

Old hinge broke, door did not open and close right.

I removed the screws from old hinge that had broke. The piece came right out with ease. I slid the new hinge in to the hole that it went in. No struggles with ease. Lined up the screw holes and put the screws back in. Finished! Works like a charm.

Parts Used:

Washer Hinge