11022352512 Kenmore Washer - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Drive Hub Kit
Part #W10528947
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a simple DIY repair with easy-to-follow instructions and usually includes everything you need to get your washer working again.
Washer Drive Pulley
Part #W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the basket. The kit includes everything you need—clutch parts, pulley, gear, and more—but make sure it fits your model before ordering. It’s a simple repair that can get your washer back to working like new.
Washing Machine Door Lock Assembly
Part #W11307244
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
Shift Actuator - 6 Pin
Part #W10913953
This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to switch between agitation and spin cycles. Engineered for durability and precision, the actuator ensures smooth transitions between wash pha...Read moreses, contributing to efficient and reliable performance. Common symptoms of a failing actuator include the washer not agitating or spinning, incomplete cycles, or unusual noises during operation. Replacing this component is a practical solution for restoring proper cycle functionality. Installation typically requires basic tools and should be performed with the appliance unplugged.
Read less
Suspension Rod Kit
Part #W11130362
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absorbing any excessive vibrations and movement caused during the washing and spinning cycles. This helps to protect the tub and interior of the ...Read morewasher from damage. If the suspension rods in your washer are faulty, you will likely notice loud banging, knocking, or scraping sounds as the tub makes contact with the washer cabinet. Each kit includes four suspension rods and springs as well as the suspension ball cups. It is advised you replace all suspension rods at the same time, as they tend to wear at similar rates.
Read less
Washer Drain Hose
Part #W11244231
The drain hose carries used water from the washer to your house drain.
Gearcase
Part #W11454734
The transmission drives the agitator and spins the basket in the washer. Possible Repair Solution For: Not washing properly, will not agitate, pumps but will not spin.
Water Inlet Valve
Part #W11038689
This inlet valve is a genuine replacement component designed for use in various washing machines. It regulates water flow by opening and closing the hot and cold water channels during the wash cycle, ensuring proper fill levels and cycle performance. The valve includes a wire harness for easy electrical connection and operates as an elect...Read morerically controlled solenoid. Over time, it may fail due to electrical shorts or mechanical wear, resulting in error codes, lack of water intake, or cycle interruptions. Installation requires basic tools such as a screwdriver or socket wrench and involves partial disassembly of the washer. Always disconnect power and water supply before beginning the repair. This OEM part is sold individually and does not include additional accessories.
Read less