11020362810 Kenmore Washer - Parts

If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the basket. The kit includes everything you need—clutch parts, pulley, gear, and more—but make sure it fits your model before ordering. It’s a simple repair that can get your washer back to working like new.

This agitator is for washers. Agitator rotates back and forth to move the clothes inside the tub to clean the load. Unplug the washer before installing this part. Wear work gloves to protect your hands.

This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.

This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to switch between agitation and spin cycles. Engineered for durability and precision, the actuator ensures smooth transitions between wash pha...Read moreses, contributing to efficient and reliable performance. Common symptoms of a failing actuator include the washer not agitating or spinning, incomplete cycles, or unusual noises during operation. Replacing this component is a practical solution for restoring proper cycle functionality. Installation typically requires basic tools and should be performed with the appliance unplugged.

This water inlet valve is for washers. The water inlet valve controls the water flow into the washer. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.

Sold individually.

The drain hose carries used water from the washer to your house drain.

This drive belt connects the washer motor to the spin system. Replace if the washer has spinning issues. Unplug the unit before installing.

This includes the Tub Seal

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

This suspension rod kit is designed to support the washer drum and minimize excessive movement during operation, helping maintain stability throughout the wash cycle. Each rod in the kit measures 26.5 inches in length and features a hook on one end for secure installation. If your washer is shaking more than usual, worn or damaged suspens...Read moreion rods may be the cause. It’s recommended to replace all four rods at once—even if only one appears faulty—as they tend to wear evenly over time. Installation may require basic tools and some disassembly of the washer. The kit includes four suspension rods along with their connecting components, and is provided as a standalone replacement part.

This gray and white washer lid bumper contains a rubber bottom and is sold individually.