10R - Overview

Models starting with 10R

Click on the best match to narrow your results.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broil Element – Part Number: WB44X173
$70.57
Special Order
Broil Element
★★★★★
★★★★★
(1)
Part #WB44X173
The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does NOT include mounting bracket.
Bake Element – Part Number: WB44X5043
$71.93
Special Order
Bake Element
Part #WB44X5043
Armature-Magneto – Part Number: 590603
$100.95
Special Order
Armature-Magneto
Part #590603
Gasket-Air Cleaner – Part Number: 590605
$10.95
Special Order
Gasket-Air Cleaner
Part #590605
Air Filter Cleaner Cartridge – Part Number: 590601
$32.95
Special Order
Air Filter Cleaner Cartridge
Part #590601
A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartment without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.
Stud – Part Number: 590691
$12.95
Special Order
Stud
Part #590691
Pin-Cotter – Part Number: 590670
$6.95
Special Order
Pin-Cotter
Part #590670
Cap-Fuel Tank – Part Number: 799324
$82.95
Special Order
Cap-Fuel Tank
Part #799324
Clamp-hose – Part Number: 791850
$5.95
Special Order
Clamp-hose
Part #791850
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.
Key-Flywheel – Part Number: 797286
$9.95
Special Order
Key-Flywheel
Part #797286
Spring-Governor – Part Number: 590625
$12.95
Special Order
Spring-Governor
Part #590625
Seal-oil – Part Number: 590712
$21.95
Special Order
Seal-oil
Part #590712

Common Symptoms of models starting with 10R

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven's bottom bake element burned up
19 of 23 people found this instruction helpful.
  • Dennis from Los Alamos, NM
  • Really Easy
  • Less than 15 mins
  • Socket set
First I turned the circuit breaker switch off for the stove unit. I then removed the two screws that hold the element in place at the back of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I attached the new element, bolting the wires into place and then screwed the element back into place on the back wall of the oven. I flipped the breaker switch back on, and turned on the oven. I was done in roughly 15 minutes. The most difficult part was having to shine a flash light into the oven to replace the part, and negotiating the hard cold kitchen floor.
Was this helpful?
Thank you for voting!
Broiler Element Burned Out
17 of 19 people found this instruction helpful.
  • Richard from Vestal, NY
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench set
Successful repair to Our GE range, manufactured prior to 1965 (when installed in house). Pulled range from wall, unplugged, removed burned-out broiler element. Previous check with GE to make cross reference of range part number to Part-select part number for this nearly 50-year-old range. Obtained new part and installed. Works. Range has self-cleaning oven, accidentally destroyed thermal switch attached to element mounting bracket, difficulty with frozen mounting nut. Self-cleaning still works; thermal switch locks out a solenoid which defeats door latch; prevents premature opening of oven door when oven too hot to open safely. Internet search did not find GE part but there are generic devices of the same type available; will consider installation later.
Was this helpful?
Thank you for voting!
The oven element burned completely into.
10 of 12 people found this instruction helpful.
  • John from Kiowa, CO
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I first removed the two screws holding the element in place. Then I pulled the element out about 2 or 3 inches and then took out the 2 small screws holding the 2 wires in place. I then removed the old element and discarded it and installed the new one in the reverse order that I took out the old one. It was quite easy to do, only took abo ut 10 to 15 minutes total time.
Was this helpful?
Thank you for voting!