106978556 Kenmore Ice Maker - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Maker was leaking.
0 of 1 people
found this instruction helpful.
-
Robert from Raleigh, NC
- Really Easy
- Less than 15 mins
-
Nutdriver
I bought the replacement icemaker on-line. I watched the on-line video instructions. They were fantastic; much better than written instructions. The repair was a breeze, and I completed it in about 10 minutes. Had I called in a repairman, this would have cost me about $300+. I made the repair myself for a cost of $114. Thanks! I will defi
... Read more
nitely continue to get parts!
Read less
Was this helpful?
Thank you for voting!
Ice maker stop making ice
0 of 1 people
found this instruction helpful.
-
Patrick from Murrieta, CA
- Really Easy
- Less than 15 mins
-
Nutdriver
I viewed the video on line and ordered the replacement kit. When I got the unit.. I checked out the unit and plugs.. shut off the water supply, unplug the refrigerator and just like the video... I removed three screws... replaced the shutoff bail and installed the new unit with the three screw. Very, very easy. Thanks.
Was this helpful?
Thank you for voting!
no problem
0 of 1 people
found this instruction helpful.
-
robert from brown city, MI
- Really Easy
- Less than 15 mins
-
Nutdriver
trun of refrigerator. trun of water. remove part.replace part.
Was this helpful?
Thank you for voting!
Ice Maker not producing ice
0 of 1 people
found this instruction helpful.
-
Betsy from Apple Valley, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
Very easy to do it yourself. Part arrived in just a couple days. Removed a couple screws and unplug the old one. Plugged in new one and replaced screws. Done deal!! Additional parts came with new part which I did not need but are there for those that do. I am very pleased with the whole process.
Was this helpful?
Thank you for voting!
not turning or making ice
0 of 1 people
found this instruction helpful.
-
Paul from Austin, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed 3 screws and unpluggeg wire plug. Did reverse to install. Took 5 min. Easy.
Was this helpful?
Thank you for voting!
none
0 of 1 people
found this instruction helpful.
-
Jerome from Potomac, MD
- Really Easy
- Less than 15 mins
-
Nutdriver
followed online instructions
Was this helpful?
Thank you for voting!
Ice maker stopped making Ice
0 of 1 people
found this instruction helpful.
-
Andrew from Abilene, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair was really easy, the part arrived that would fit different designs, and with a screw driver and appropriate plug in connector, the unit was making ice better than ever.
Was this helpful?
Thank you for voting!
Icemaker stopped working
0 of 1 people
found this instruction helpful.
-
Sue from Gainesville, FL
- Really Easy
- Less than 15 mins
My icemaker stopped working. After a day of no ice, I ordered the replacement icemaker. It arrived two days later (fast -- I was expecting it in 3-5 days). That same day, the original icemaker popped out a few ice cubes. So I waited to see what was going to happen. Every few hours, it popped out a few more cubes. So I waited awhile
... Read more
longer. After two days of slow-motion icemaking, my good old icemaker went back to making tons of ice all the time. I guess it just needed a few days vacation -- just like the rest of us. I called to tell PartSelect, and they cheerfully told me how to return the part for a refund.
Read less
Was this helpful?
Thank you for voting!
Motor quit on icemaker
0 of 1 people
found this instruction helpful.
-
Patrick from La Porte, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
Unplugged the frig and took out the ice tray.Removed 3 screws and slid the old unit farther out. Removed the cover and released the electrical connector. Took out old unit.
Removed cover on the new unit and connected the electrical connector ,seated new unit in and reattached the 3 screws. replaced cover and plugged in the frig ... Read more . Ice started making about 45 mins later.
Removed cover on the new unit and connected the electrical connector ,seated new unit in and reattached the 3 screws. replaced cover and plugged in the frig ... Read more . Ice started making about 45 mins later.
Read less
Was this helpful?
Thank you for voting!
Ice maker leaking into bin
0 of 1 people
found this instruction helpful.
-
Stephen from Jefferson, MD
- Really Easy
- Less than 15 mins
-
Socket set
Needless to say, the ice dispenser was useless, just one big glacier of ice. I ordered the replacement ice maker and had it within two days. The instructions were perfect and the installation went without a hitch. Actually I was a bit disappointed, I had planned on spending an hour on the repair and was done in 15 minutes. I will defi
... Read more
nately use PartSelect again in the future!
Read less
Was this helpful?
Thank you for voting!
Stopped making ice
0 of 1 people
found this instruction helpful.
-
Richard from Plano, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed bad icemaker, replaced with replacement part.
Was this helpful?
Thank you for voting!
Ice Maker stopped working.
0 of 1 people
found this instruction helpful.
-
Joseph R. from Indianapolis, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
Called home repair. They wanted $244 to respond and replace. That's 20% of the total cost of the refidgerator! I went on-line, found Part Select and called with the model number. The part arrived less than 24 hours later. I took out three screws with a nut driver, unplugged the old ice maker, plugged in the new one replaced the screws and
... Read more
the mext day, I had ice. Easy peasy, lemon sqeezy. Total cost. . . $121.
Read less
Was this helpful?
Thank you for voting!
Leaking icemaker
0 of 1 people
found this instruction helpful.
-
Mary from Chagrin Falls, OH
- Easy
- Less than 15 mins
-
Screw drivers
turned off the power, removed the old one and put in the new one. It was a snap.
Was this helpful?
Thank you for voting!
ice maker would not make ice
0 of 1 people
found this instruction helpful.
-
Mary from Marco Island, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
My son installed it, but I want to say that I was very impressed with your service...the part was not after market and arrived the next day..Your staff was efficient and very pleasant. I would not hesitate to recommend your company.
Was this helpful?
Thank you for voting!
Ice maker quit working
0 of 1 people
found this instruction helpful.
-
Nancy from MELBOURNE BCH, FL
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
It went really easy due to the great repair/replacement videos on your site!! Delivery was super fast as well, Thanks, I'll be back!
Was this helpful?
Thank you for voting!