- Home
- 1069751781
- Instructions
1069751781 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leakiong water from the freezer compartment into the lower refrigeration compartment
7 of 12 people
found this instruction helpful.
-
Mark from indianapolis, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
After unplugging the appliance, I unscrewed the screws in the bottom and the back of the freezer compartment and un-clipped the connector for the ice machine, which i do not have installed. I clipped the pink and brown wires and replace the switch with the new switch. unfortunately, the appliance is still dripping water from the freezer c
... Read more
ompartment. It worked for a couple of days then stopped working. Still looking for a true FIX.
Read less
Was this helpful?
Thank you for voting!
The door light socket was broken and hanging down
6 of 9 people
found this instruction helpful.
-
David from Roanoke, VA
- Really Easy
- Less than 15 mins
The refrigerator light in our Kenmore fridge has been flaky for a number of years. The slightest bump would knock it out of the hole it fits into leaving the bulb dangling. Usually since we were used to it, we could avoid bumping it so it was no real problem, but a recent visitor bumped it and it once again was hanging. I decided this tim
... Read more
e, to take a serious look at it and fix the problem for real. I had options, duct tape, hot glue gun, goop...or a new part! A quick search on the internet, and I found www.PartSelect.com I entered my model # , quickly found the correct part number. The part came 1 1/2 days after I ordered it. The repair was very simple, I unplugged the fridge, removed the wires from the spade connectors on the old light socket, and attached them to the new socket. I then pushed the socket into the hole, and with new spring clips, it snapped snuggly into place. The socket came with extra wire connectors which I didn't need, the socket fits multiple brands of appliances. It also came with a bulb protector, but that wasn't needed for my fridge either. I was very pleased with the speed and ease of the repair. No more dangling light bulbs!
Read less
Was this helpful?
Thank you for voting!
Cracked crisper
5 of 6 people
found this instruction helpful.
-
Ronald from Pomona, CA
- Really Easy
- Less than 15 mins
Took out the cracked one, and replace with the new one. Fitted perfectly.
Was this helpful?
Thank you for voting!
Broken drawer
5 of 6 people
found this instruction helpful.
-
Linda from Mabscott, WV
- Really Easy
- Less than 15 mins
I ordered the drawer which arrived 3 days later and I just took out the old one removed the white handle cover placed it on the new drawer and put it back in quick, easy done.
Was this helpful?
Thank you for voting!
The parts where incorrect
5 of 6 people
found this instruction helpful.
-
Dwight from BURLINGTON, CT
- Very Difficult
- More than 2 hours
-
Nutdriver, Screw drivers
I received two Ice Maker kits and one was packaged wrong and the second was also wrong, I called the support staff and worked with them for over two hours before being told I could return the wrong parts for a full refund. After two / three weeks and a second call I received a email stating my refunds are being processed and I was charged
... Read more
shipping and return fee’s buyer beware!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Noisey Blowerfan and Broken Air Tower
5 of 6 people
found this instruction helpful.
-
Patrick from WALPOLE, MA
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers, Socket set
Watched your video on how to replace the evaporator fan motor. Took apart the freezer and replaced the fan motor with blade. It was a little tight getting all the harnessing back into the space but I did it. It would have been nice to see a video to put everything back but I did it and replaced the air tower with no problem. The end r
... Read more
esult is my freezer evaporator fan motor with blasé is a lot quitter now. Thanks
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
The drawer cracked and broke.
4 of 4 people
found this instruction helpful.
-
Leonard from MASTIC BEACH, NY
- Very Easy
- Less than 15 mins
Just slid the drawer into the runners and finished.
Was this helpful?
Thank you for voting!
Installed a Ice Maker
4 of 4 people
found this instruction helpful.
-
Don from HOUMA, LA
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Very easy to install
Was this helpful?
Thank you for voting!
Cracked Meat Keeper and Crisper
5 of 7 people
found this instruction helpful.
-
Theodore from Simi Valley, CA
- Easy
- Less than 15 mins
Replaced drawers.
Other Parts Used:
Was this helpful?
Thank you for voting!
Light in my refrigerator didn't work.
5 of 7 people
found this instruction helpful.
-
Joseph from Byron Center, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
At first I went to a local part supplier and they didn't have it in stock but could order it for me for $55.00 plus $10.00 to ship it. I told them I would have to think about it. I went home and got on the computer and found your web site and was I shocked when I saw the same part listed for $6.98 and $7.00 to ship it. You guys saved m
... Read more
e $50.00. The part arrived in two day and took 5 min. to install. I now have light in my refrigerator. Thank you.
Read less
Was this helpful?
Thank you for voting!
3 inches of frost in Fridge, 72 degrees in Fridgerator
6 of 10 people
found this instruction helpful.
-
Gerald from Orangeburg, SC
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First defrosted it to makes sure all Air flow was opened. Tested the Defroster heater with omh meter, it was OK. Found the location of the defrost timer on the online diagrams. Used nut driver to remove cover.
Replaced timer. The hardest part was decieding how to wire it up, tis was a universal kit and depending on how it was wired ... Read more as to how often the defrost ran. The firt choice was every 8 hours. Since this was going to be opened often, I picked that one.
Plugged it with in 24 hrs freezer wall mesured -5 and the fridge was at 30, so had to warm it up a bit.
Now all complaints gone, Ice making has been doing better also.
Replaced timer. The hardest part was decieding how to wire it up, tis was a universal kit and depending on how it was wired ... Read more as to how often the defrost ran. The firt choice was every 8 hours. Since this was going to be opened often, I picked that one.
Plugged it with in 24 hrs freezer wall mesured -5 and the fridge was at 30, so had to warm it up a bit.
Now all complaints gone, Ice making has been doing better also.
Read less
Was this helpful?
Thank you for voting!
Refrigerator light would not stay on
4 of 4 people
found this instruction helpful.
-
Dave from Manchester Center, VT
- Easy
- 15 - 30 mins
-
Nutdriver, Socket set
Removed the 2 screws holding the light bulb shield, then the 4 uolding the metal panel. Unplugged the olw door switch and replaced.
reassembled the pieces.
reassembled the pieces.
Was this helpful?
Thank you for voting!
Freezer to warm
4 of 4 people
found this instruction helpful.
-
Mike from DANSVILLE, NY
- Really Easy
- 15 - 30 mins
-
Nutdriver
Watched the videos and made it simple.
Other Parts Used:
Was this helpful?
Thank you for voting!
Bad module on icemaker
4 of 4 people
found this instruction helpful.
-
Randy from LAFAYETTE, LA
- Really Easy
- 30 - 60 mins
-
Screw drivers
First shut off water supply and unplug power. Unscrew icemaker assembly from side wall with 3 screws. Remove front cap and you can clearly see module. Unscrew and remove module ( only three screws). Install new module and revers procedure to finish up. Ice was ready in just a few hours. Video provided by this site was right on and left
... Read more
no questions.
Read less
Was this helpful?
Thank you for voting!
Removed the old parts then connected the new parts.
4 of 4 people
found this instruction helpful.
-
Jonathan from OLIVE BRANCH, MS
- Really Easy
- 30 - 60 mins
-
Screw drivers
The compressor immediately started when I plugged the refrigerator back in. Around 24 hours later the freezer compartment was at 0 degrees, and the refrigerator was at 35 degrees.
Was this helpful?
Thank you for voting!