1069658114 Kenmore Refrigerator - Instructions

All Instructions for the 1069658114
76 - 90 of 211

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Crisper drawer rail broken at one end
2 of 2 people found this instruction helpful.
  • MARTY from GREAT FALLS, MT
  • Very Easy
  • 30 - 60 mins
The rail just snapped into place with a light pressure. I worried it would require manipulation or heavy pressure and I would break the end while installing it.
Was this helpful?
Thank you for voting!
ordered a new ice maker, new refrigerator did not come with one.
2 of 2 people found this instruction helpful.
  • Scott from ROCHESTER, NY
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable)
I watched the video that was included with my on line order, it was helpful, although different model shown . I would say it was not difficult to install, the enclosed instructions were a bit confusing.
Was this helpful?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
2 of 2 people found this instruction helpful.
  • Vincent from THE VILLAGES, FL
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I followed the directions and it worked.
Was this helpful?
Thank you for voting!
Broke light switch while cleaning
2 of 3 people found this instruction helpful.
  • Gail from Golden, CO
  • Really Easy
  • Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
Drawer cracked/split
4 of 9 people found this instruction helpful.
  • Yvonne from Fredericksburg, VA
  • Really Easy
  • Less than 15 mins
I just slipped the new drawer into place. So easy, even a woman can do it! ( I am female!)
Was this helpful?
Thank you for voting!
latch end of track broke when too full jammed drawer was forced
2 of 3 people found this instruction helpful.
  • H. James from Bella Vista, AR
  • Easy
  • Less than 15 mins
PartsSelect diagrams at their website made it easy to find and order the right part at a reasonable price. I removed the lower glass shelf and frame that supports it. I removed broken track and slipped in the new track and snapped it in place with the orifice at the rear of the track over small peg in the back of the frame. If I had call ed a regular refrigerator repair man, i'll bet this job would have cost me at least 70 or 80 dollars,
Was this helpful?
Thank you for voting!
Crisper Drawers were cracked
2 of 3 people found this instruction helpful.
  • Luke from CENTER, TX
  • Really Easy
  • 15 - 30 mins
I replaced the cracked crisper drawers with the new ones just by sliding them in the bottom of the refrigerator. This did not solve the problem because one of the drawers was smaller than the other one and left a big space. When I ordered the Crisper Drawers I looked at the part diagram and it looked to me that the drawers were two differ ent sizes and thats what I ordered. I now need to order another large drawer to finish the repair.
Was this helpful?
Thank you for voting!
replaced cracked compartment door
2 of 3 people found this instruction helpful.
  • john from NORWOOD, MA
  • Really Easy
  • Less than 15 mins
removed old and installed new compartment door by hand.
Was this helpful?
Thank you for voting!
Original drawer handle had cracked and the crack spread down to the body of the crisper unit.
2 of 3 people found this instruction helpful.
  • Scott from JAY, VT
  • Very Easy
  • Less than 15 mins
Took out the old, cracked, crisper unit and removed the white trim piece on the handle so that we could re-use it on the new crisper unit (which, in spite of the $90+ price tag did not come with new trim). The whole thing took 3 minutes to do.
Was this helpful?
Thank you for voting!
none
2 of 3 people found this instruction helpful.
  • Joseph from BONITA SPGS, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
install ice maker 2 screws wire harness pluged in done
Was this helpful?
Thank you for voting!
no drawer
1 person found this instruction helpful.
  • Xiaoping from KIRKLAND, WA
  • Really Easy
  • Less than 15 mins
just insert
Was this helpful?
Thank you for voting!
My refrigerator would not defrost.
1 person found this instruction helpful.
  • Eddie from BRONSTON, KY
  • Very Easy
  • Less than 15 mins
The first part I changed was the defrost timer but it did
not solve the problem, I replaced the bi-metal defrost sensor
and I have the same problem.

I can defrost by turning the clock manually and heater works.



























problem.
Was this helpful?
Thank you for voting!
3 screws
1 person found this instruction helpful.
  • Michael from SALINA, KS
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Ice maker fit perfectly over 2 top screws. I tightened them and put the one on the bottom. I was done in less than 10minutes. Everything fit perfectly as expected. Couldn't have been eaiser. Parts Select is my go to online store.
Was this helpful?
Thank you for voting!
The refrigerator stopped cooling.
1 person found this instruction helpful.
  • Mike from PT CHARLOTTE, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
The evaporator fan and the condenser fan were operating, but the compressor was not operating. I removed the terminal cover from the compressor and checked continuity on the overload. I found that it was an open. I removed the overload and installed the new one and the refrigerator is now cooling. I also cleaned the condenser coil. I beli eve this is what caused the high temperature/high amperage condition, that finally caused the overload to fail.
Was this helpful?
Thank you for voting!
Light switch broke
2 of 4 people found this instruction helpful.
  • Carolee from Spokane Valley, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
Was this helpful?
Thank you for voting!
All Instructions for the 1069658114
76 - 90 of 211