1069608310 Kenmore Refrigerator - Instructions

All Instructions for the 1069608310
106 - 120 of 203

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Two of the parts were broken so the shelf was laying on the drawers so neither could be used effectivly
1 of 2 people found this instruction helpful.
  • ROD from LINCOLN, NE
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Pulled out the stud with a wire cutter and replaced it with the exact part you shipped in the kit.

The other 2 parts just slipped on the brackets

Nice thing is now I have extra parts for the other shelf.
Was this helpful?
Thank you for voting!
Movers broke the icemaker water fill tube shoving my refrigerator through the front door.
1 of 2 people found this instruction helpful.
  • Christopher from Valley Village, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I unscrewed the fill tube screws from the back of the fridge, and pulled the tube out.

Then I put the new tube in, screwed the screws back in and reconnected the waterline.
Was this helpful?
Thank you for voting!
Broken shelf supports
1 of 2 people found this instruction helpful.
  • Bob from Las Vegas, NV
  • Really Easy
  • Less than 15 mins
Took just a few moments to install. The parts fit like a glove,
Was this helpful?
Thank you for voting!
Nonr
1 of 2 people found this instruction helpful.
  • Gaynell P from Spring, TX
  • Really Easy
  • Less than 15 mins
Replaced missing stud.
Was this helpful?
Thank you for voting!
light did not work on the refrigerator side
1 of 2 people found this instruction helpful.
  • David from GROVESPRING, MO
  • Easy
  • Less than 15 mins
bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what i s inside the refer!
Was this helpful?
Thank you for voting!
Light switch broke off
1 of 2 people found this instruction helpful.
  • Kathy from TEMECULA, CA
  • Very Easy
  • Less than 15 mins
  • Pliers
We looked up the problem online with the model number of the refrigerator. We ordered the part and followed the video installation that was sent with the order and was found online prior to purchasing
Was this helpful?
Thank you for voting!
Rocker on switch broke off
1 of 2 people found this instruction helpful.
  • David Barnes from ROSWELL, NM
  • Very Easy
  • Less than 15 mins
Eased the putty knife under the edge of the switch housing and pried it off. Pulled two wires off the old terminals and hooked them onto the new one and reinstalled into the refrigerator body.
Was this helpful?
Thank you for voting!
Old tube had cracked due to being frozen....
1 of 3 people found this instruction helpful.
  • Stephen from Greensboro, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I followed the simple steps outlines in the great video! Thanks
Was this helpful?
Thank you for voting!
A door handle mount broke on the freezer door.
1 of 3 people found this instruction helpful.
  • Dominic from Walton, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The repair was easy. The amazing story was that I ordered the part around 12:00 noon on Friday December 21st and it arrived by USPS mail the next day Saturday December 22, right in the heat of the Christmas rush.
Was this helpful?
Thank you for voting!
Lights didn't always come on when was opened
0 of 1 people found this instruction helpful.
  • Gary from Jenkintown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Was this helpful?
Thank you for voting!
Door Light switch cracked Mounting
0 of 1 people found this instruction helpful.
  • Paul from Hinsdale, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we re staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this helpful?
Thank you for voting!
Freezer shelf falling off
1 of 4 people found this instruction helpful.
  • Carl from Crete, IL
  • Really Easy
  • Less than 15 mins
  • Pliers
One of the front studs was broken off. I had to use pliers to pull it out (kind of tight). Then I inserted the back and front holders and layed the shelf back in. Total time...10 min
Was this helpful?
Thank you for voting!
19 year old light switch broke
0 of 1 people found this instruction helpful.
  • Fred from Watertown, NY
  • Really Easy
  • Less than 15 mins
Great service. Unpluged old switch and pluged in new one. Works great
Was this helpful?
Thank you for voting!
The fill tube froze and cracked
0 of 1 people found this instruction helpful.
  • Phillip from Sellersburg, IN
  • Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
It was easy and quick to find the part that I needed, order it and have it shipped. The fill tube arived in 3 days and was easy to replace.
Was this helpful?
Thank you for voting!
Part broke.
0 of 1 people found this instruction helpful.
  • Felix A from Orlando, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replacement partfit perfectly.
Was this helpful?
Thank you for voting!
All Instructions for the 1069608310
106 - 120 of 203