- Home
- 1069608072
- Instructions
1069608072 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noisy defrost timer
0 of 2 people
found this instruction helpful.
-
Jeffrey from Little Falls, NY
- Easy
- Less than 15 mins
-
Nutdriver
Part # had been replaced with another timer. Original timer had 2 wires coming out of it. Replacement only had 1 wire. Instructions showed 2 options for where to place the wire. I chose option 2 and I guess I was right. Installation took less than 15 minutes and refridge is back to normal. (Quiet)
Was this helpful?
Thank you for voting!
The refridgeror side was not cold enough
0 of 2 people
found this instruction helpful.
-
Patrick from Sun City, AZ
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
it was a simple repair once I located the part I had to replace . I really like your speedy delivery of the part I needed Thank you Pat Crotty
Was this helpful?
Thank you for voting!
Magnets don't work very good
1 of 5 people
found this instruction helpful.
-
Emma from Lake Alfred, FL
- A Bit Difficult
- 1- 2 hours
-
Nutdriver
took old one off and put the new one on.
Was this helpful?
Thank you for voting!
Starting relay went out
5 of 18 people
found this instruction helpful.
-
George from Conroe, TX
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Forty years ago I serviced air conditioners and all kinds of refrigeration. At that time starting relays were electro mechanical, I hadn’t looked under a refrigerator in a lot of years and was surprised to find out that the new relays were solid state. The defective one had a bunch of broken pieces floating around in the case. I jury rigg
... Read more
ed a starting cord and confirmed that the compressor would start and looked at running current for thirty or so seconds. I ordered a new relay kit and it worked just right. I’m seventy five years old and it takes me longer to get up off the floor than it took to replace the parts. Your delivery was first rate the parts got here before I finished doing the paint touch-up on the door under the ice maker/water dispenser. Fed ex was easily three to five days faster than the brown truck.
Read less
Was this helpful?
Thank you for voting!
change relay
3 of 12 people
found this instruction helpful.
-
Robert from Boxborough, MA
- Easy
- 15 - 30 mins
-
Screw drivers
unplugged relay and plugged in
Was this helpful?
Thank you for voting!
Switch was not working after a repairman had fixed something else
0 of 4 people
found this instruction helpful.
-
Jackie from Nova, OH
- Really Easy
- Less than 15 mins
Please bear in mind I am 65 years old & it was harder to get up & down off the floor then to change the switch. Was very easy - watched video, unplugged unit. I used the putty knife at the right front corner to work loose, when it came loose had to loose the left side a little. The unit pulled out easily. detached the wired that had a
... Read more
single plug with 2 prongs on it. Attached the plug, pushed new switch into place. There was no way you could place wires on wrong prong. When done, plugged refrigerator back in & checked if working. I CAN SEE THE LIGHT and the food in the freezer now. Thank you for making an easy repair.
Read less
Was this helpful?
Thank you for voting!
fill tube broken at elbow
-
Jack from Houston, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Moved the refrigerator out, unscrewed old fill tube, pulled it out, placed finger-screw on water line, screwed it on, put in new fill tube, re-screwed fill tube in place, put refrigerator back into place. Done!
Was this helpful?
Thank you for voting!
Light switch which turns on the lights when the door opens went out
-
Dennis from Lawrenceville, GA
- Really Easy
- Less than 15 mins
-
Nutdriver
This is an easy fix, simply remove and replace. What I was impressed with is that a how to video was provided along with my part. I wish all manufactures would offer this, the video was easy to understand and you had a good view of the operation. Thanks, a job well done.
Was this helpful?
Thank you for voting!
No light in frig
-
Irene from Whitehall, MT
- Really Easy
- Less than 15 mins
We tried repairing with a new switch which was very easy to install but it didn't fix the problem.
Was this helpful?
Thank you for voting!
Water fill tube was broke at the 90° in back of the frige
-
Douglas from Pahrump, NV
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Water was already off. All I had to do was pull the fridge away from the wall, remove two screws that hold the fill tube onto the back of the frige, then remove the fill tube. Install the new fill tube, reinstall the two screws. Had to cut the water line straight and clean, slip on the new Compression nut and farrell and insert into the n
... Read more
ew fill tube, tighten-up, good-to-go.
Read less
Was this helpful?
Thank you for voting!
light switch sticking
-
Paula from Rush, NY
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
I watched the video and thought "I can do this". Made some notes and then proceeded to remove the old switch and replace with the new one. Thank you.
Was this helpful?
Thank you for voting!
light would come on and off
-
Dora from Rock Island, IL
- Really Easy
- Less than 15 mins
Viewed the viedo - it showed what to do
Was this helpful?
Thank you for voting!
No Light
-
Mary from Jefferson Township, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took socket out and replace it with new one. Very easy. W saved alot of money doing it ourself.
Was this helpful?
Thank you for voting!
Water was running into refrig from freezer and ice cream was soft
-
William from Delano, MN
- Really Easy
- Less than 15 mins
-
Nutdriver
We wasted time looking for the electrical schematic on our refrigerator (the first step in the instructions). By skipping that and reading further in the instructions, the type of cooling that the refrigerator has can easily be determined by the colors of the wires that go to the defrost timer. You need to know this to set up the timer
... Read more
properly for your specific refrigerator. Had I just started there, the entire repair would have taken less than 10 minutes. Very simple repair and it works like a charm, no more water coming into the refrigerator and the ice cream is rock hard. Glad we didn't have to spend lots on a new appliance. Thanks Part Select.com! BH
Read less
Was this helpful?
Thank you for voting!
Broken water line connection
-
Carl from Bloomington, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Very easy to replace. Disconnect water line. remove 2 screws pull out filler tube. replace with new one.
Was this helpful?
Thank you for voting!