All Installation Instructions for Kenmore Refrigerator 1069605630

freezer quit working

1 person found this instruction helpful.

Anthony from CIRCLEVILLE, OH
Really Easy
Less than 15 mins
Pliers

replaced relay switch
when I finally got started to do the repair it took 15 minutes my biggest delay was no instructions were sent with the part and it took time to get some

Was this helpful?

door hinge broke.

2 of 4 people found this instruction helpful.

Bernard from DONALDSONVLLE, LA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers

Removed door and replaced bushing bracket was ok.

Was this helpful?

Shelf studs broke several years ago and I had a problem locating them. Finally wised up and checked Part Direct and found them, ordered the kit w/ 12 pieces. Then quickly watched the installation video. Took less than 30 minutes to replace two different studs. Wife is very happy.

1 person found this instruction helpful.

Karl from BIRDSBORO, PA
Easy
15 - 30 mins
Pliers

Simply took broken pieces of old stud out and replaced with the new ones. Used pliers to adjust them. Replace a freezer stud and a fridge stud.

Was this helpful?

End cap broke for freezer door.

1 person found this instruction helpful.

Sharon from SPRINGVILLE, NY
Very Easy
Less than 15 mins

I slid the bar into the end caps, then slid the end caps into the slots on the door. No tools were required. My fridge is old, and I was very pleased that I was able to find the part.

Was this helpful?

Broken kickplate retainers

1 person found this instruction helpful.

Joe from STRATFORD, OK
Very Easy
Less than 15 mins
Screw drivers

replaced retainers. remove and replace four(4) phillips screws.

Was this helpful?

No cold

1 person found this instruction helpful.

Jacqueline from LEXINGTON PK, MD
Very Easy
Less than 15 mins
Nutdriver, Pliers

Like you video

Was this helpful?

Plugged it in.

1 person found this instruction helpful.

Adam from GLOVERSVILLE, NY
Really Easy
Less than 15 mins
Nutdriver

Not so good that was not the problem. Fan is not seized and all the lights work and display is not on but lights up as well. No start once plugged back in after 15 minutes of being unplugged. Nothing same no change.

Was this helpful?

Light rocker switch broke and refrigerator light couldn't go on.

2 of 4 people found this instruction helpful.

Cathy from HOPATCONG, NJ
Very Easy
Less than 15 mins

I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.

Was this helpful?

Freezer occasionally had a temperature alarm.Clicking noise also.

1 person found this instruction helpful.

Barry from FORD CITY, PA
Really Easy
Less than 15 mins

Was told capacitor was problem 90% of the time.Capacior was not the problem.Bad start relay.

Was this helpful?

freezer and refrigerator compartments not cold enough

1 person found this instruction helpful.

Michael from Colorado Springs, CO
Really Easy
Less than 15 mins
Nutdriver

Used the suggested problem list here to narrow down that the repair was most likely the run capacitor. Poped the new one in and I now have better control of my compartment ranges. I have a temperature gauge in each compartment. Check them every opening of the doors.

Was this helpful?

The Light Socket Burned Out.

5 of 13 people found this instruction helpful.

MATTHEW from STOCKTON, CA
Really Easy
Less than 15 mins

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Was this helpful?

My wife broke the shelf support

1 person found this instruction helpful.

Hamid from Owasso, OK
Really Easy
Less than 15 mins

The new shelf support part fit perfectly. I needed no tools just slid it on the existing bracket. Super easy.

Was this helpful?

A couple supports broke

2 of 4 people found this instruction helpful.

Michael from Cary, IL
Really Easy
Less than 15 mins

I simply slid off the broken supports, and slid the new ones on.

Was this helpful?

Broken wheel on leveling roller

2 of 4 people found this instruction helpful.

Max from Jonesboro, AR
Really Easy
Less than 15 mins
Socket set

I removed one bolt and took out the old roller after first blocking up the fridge. Then I was puzzled for a moment because the hole in the new assembly was not tapped. But then I saw that the old bolt was a self tapping bolt. I used it to tap the hole then removed it and installed the new assembly. No sweat job.

Was this helpful?

broken end caps

1 person found this instruction helpful.

Patrick from Narragansett, RI
Really Easy
Less than 15 mins

snapped the new ones on the aluminum bar and inserted into the freezer

Was this helpful?

1069605630 Kenmore Refrigerator - Instructions