1069354211 Kenmore Refrigerator - Instructions

All Instructions for the 1069354211
121 - 135 of 553

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Shelf replacement, good fit.
2 of 2 people found this instruction helpful.
  • Denise from OKLAHOMA CITY, OK
  • Very Easy
  • Less than 15 mins
The rental house I live in did not come with the original shelves for the Refrigerator. Had to strategically stack stuff on top of one another with locker shelves. Entered the model number on the site, order the best matching item, and the part that came was a perfect fit. I'll be getting another.
Was this helpful?
Thank you for voting!
Faulty light socket
3 of 5 people found this instruction helpful.
  • Larry from HOUSTON, TX
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Followed the video instructions.
Was this helpful?
Thank you for voting!
OLDER Ice Maker on the fritz
6 of 14 people found this instruction helpful.
  • Eric S from Boca Raton, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Wrench set
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Was this helpful?
Thank you for voting!
No ice
2 of 2 people found this instruction helpful.
  • GARY from WEST CHESTER, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the icemaker. One screw at the bottom and then unplug the electric. Remove the old motor from the face that has 3 screws holding it. Put the new motor in. A very simple job. I now have a full ice bin by the next morning.
Was this helpful?
Thank you for voting!
My ice maker just stopped working
4 of 8 people found this instruction helpful.
  • Lori from Boca Raton, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I Removed 3 screws, pulled off the plate and put the new one on, screwed in 3 screws and away I went. I could not believe how easy it was to order the part and how quickly it arrived. I was very pleased. And I was literally screaming with excitement when I heard the first set of ice cubes drop!
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people found this instruction helpful.
  • Thomas from Roseville, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people found this instruction helpful.
  • dorotea from staten island, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
icemaker wasn't making ice
2 of 2 people found this instruction helpful.
  • JAMIE from HANOVER, PA
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
i followed the online instructions on how to take the icemaker apart, which were very easy to follow. Once the new part arrived it plugged right in and a few steps later it was back together. within the hour we were hearing the sound of ice dropping into the tray. thanks for all the help this definitely saved us money and hopefully we get many more years out of this icemaker.
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people found this instruction helpful.
  • stu from richmond, VA
  • Easy
  • Less than 15 mins
  • Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
No Ice, water was valve working, the ice tray was turning
2 of 3 people found this instruction helpful.
  • Jerry from MERRITT IS, FL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Installed the icemaker control assembly this corrected the problem suspect contacts on the old unit were not making a good contact over time, due to the damp area in the freezer the new unit corrected the repair easy repair.
Was this helpful?
Thank you for voting!
the freezeer gasket was not sealing properly and the refrigerator door one was torn
2 of 3 people found this instruction helpful.
  • christine from hackensack, NJ
  • A Bit Difficult
  • 1- 2 hours
  • Socket set
Since the parts arrived with no instructions and I had a vague idea of what I had to do, I went on You-tube and watched a video which was very helpful. It was a little difficult at first but once I got the hang of it things went smoothIy. It's like a brand new refrigerator now!
Was this helpful?
Thank you for voting!
Water liking into the ice tray causing an iceberg
2 of 3 people found this instruction helpful.
  • Joe from Newbury Park, CA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
Removing the ice making assembly from the Ice compartment was not difficult except that two of the 3 screws we not visible without a mirror and then my nut driver was 5" long making it very tight quarters, so it was a time consuming process to remove them.
Once the 3 screws were removed the wiring harness was easily disconnected and the whole assembly came out.
The next step was to figure out how to remove the faulty part from the rest of the assembly.
After some strong persuasion the part would not separate from the control Assy. (The front of the unit) To complete the job I had to pull the front cover and unplug the motor and heater assy to expose two additional screws that had to be removed to pull the defective part out. The reassembly went quite easy except the 2 screws that you need a mirror to see. I was also trying to hurry because the frozen items were not holding all that well after the door was open for about an hour and a half. An instruction sheet showing the steps would have cut the time over 1/2!
Was this helpful?
Thank you for voting!
Crisper post was missing
3 of 6 people found this instruction helpful.
  • Annette from Coon Rapids, MN
  • Easy
  • Less than 15 mins
My refrigerator is about 26 yrs old and the part I received must have been for newer models, but I was able to insert the part into a little rubber part attached to the bottom the refrigerator,
Was this helpful?
Thank you for voting!
none
2 of 3 people found this instruction helpful.
  • Joseph from BONITA SPGS, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
install ice maker 2 screws wire harness pluged in done
Was this helpful?
Thank you for voting!
wasnt making ice
2 of 3 people found this instruction helpful.
  • kandra from newhall, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
followed instructions provided when ordering part
Was this helpful?
Thank you for voting!
All Instructions for the 1069354211
121 - 135 of 553