106556 Kenmore Refrigerator - Overview

Models starting with 106556

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Whirlpool EveryDrop3 Refrigerator Water Filter – Part Number: EDR3RXD1
$69.99
In Stock
Whirlpool EveryDrop3 Refrigerator Water Filter
★★★★★
★★★★★
(1)
Part #EDR3RXD1
This advanced refrigerator water filter utilizes Triple Filtration Technology to reduce a wide range of contaminants, including mercury, lead, and trace pharmaceuticals, ensuring cleaner and safer water for drinking and food preparation. Certified to meet NSF standards, it is designed to deliver high-quality filtration performance across compatible refrigerator models. The filter should be replaced every six months or after filtering approximately 300 gallons to maintain optimal contaminant reduction. A noticeable decrease in water flow from the dispenser may also indicate the need for replacement. Installation is quick and tool-free, and it is recommended to flush at least two gallons of water through the system before use.
Light Bulb - 40W – Part Number: 8009
$26.41
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(47)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Refrigerator Lower Door Closing Cam – Part Number: WP2182179
$15.31
In Stock
Refrigerator Lower Door Closing Cam
★★★★★
★★★★★
(29)
Part #WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack or wear down over time. If your door will not open and close properly you may need to replace the door closing cam. To successfully install this part, you will need a 5/16 nut driver and a small flat blade screwdriver. Before you begin, unplug your appliance and disconnect the water supply. Lubricating this part may help with installation. This replacement part is sold individually. This part will fit both the left and right side of your refrigerator door. To make the repair, remove the top hinge cover, then the top hinge support. Lift the door from the bottom support and remove the old door cams. Replace the cams, using a little lubricant if necessary, and place the door back on the lower hinge support. Replace the top hinge support and your repair is complete!
Refrigerator Door Cam – Part Number: WPW10329686
$15.29
In Stock
Refrigerator Door Cam
★★★★★
★★★★★
(69)
Part #WPW10329686
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches onto the door hinge and should be replaced if broken or if there is noticeable damage. Refer to your model number and user manual to ensure this is the correct part for you. To do this repair you will need a 5/6 nut driver, a 5/16 socket, and a ratchet. For safety purposes, do not forget to turn off your appliance before making this repair. Note that this piece is black, and as per the manufacturer requires a new screw to mount the door cam which is sold individually. Please also note that this is the closing cam for the lower door, and the upper door cam is sold as a separate kit.
Refrigerator Door Shelf Bin -  White – Part Number: WP2187172
$52.46
In Stock
Refrigerator Door Shelf Bin - White
★★★★★
★★★★★
(22)
Part #WP2187172
This refrigerator door shelf bin, also known as the door bin, or sometimes just a "bucket", is an authentic manufacturer-certified part made of white plastic and is easy to install. It is used to hold items in the fridge door, like jars, cans, and bottles, and you'll be able to visually see if the part is broken or warped. This particular shelf attaches directly to the fridge door; you should be able to pull out the old bin and snap the new one into place by observing the slots and pushing the bin down into them. You can check if this model is right for your appliance by checking your user manual and model number. The door bin measures about 18 inches wide, 4.5 inches high, by 7 inches deep. This door shelf bin is sold individually, so if your refrigerator takes multiple bins, which many do, you will need to order the appropriate amount of bins.
Refrigerator Crisper Drawer With Handle – Part Number: WP2188664
$108.53
In Stock
Refrigerator Crisper Drawer With Handle
★★★★★
★★★★★
(39)
Part #WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food is kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. Inspect it for visible damage like cracking or warping, which should be obvious. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high and is a genuine OEM replacement part. It is sold individually. Note that there are several different types and options for the lower vegetable and meat drawers for your refrigerator, and you should check your user manual carefully to ensure that this is the drawer you are looking for.
Refrigerator Capacitor – Part Number: WPW10662129
$58.29
In Stock
Refrigerator Capacitor
★★★★★
★★★★★
(36)
Part #WPW10662129
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Refrigerator Crisper Pan – Part Number: WP2188661
$191.21
In Stock
Refrigerator Crisper Pan
★★★★★
★★★★★
(30)
Part #WP2188661
This model is transparent and made entirely of plastic. Take note that the pan is sold individually.
Refrigerator Pan Slide Track – Part Number: WP2223320
$38.36
In Stock
Refrigerator Pan Slide Track
★★★★★
★★★★★
(13)
Part #WP2223320
This manufacturer-certified Pan Slide Track allows the drawer to slide in and out. It measures roughly 12 inches in length If this track is damaged or missing, you won't be able to move the drawer properly. The slide attaches to the side wall of the fridge and can be placed on either side. Refer to your model number and user manual to ensure this part is right for you. To make this repair, first, remove the snack pan and glass shelf. Slide out the track from its locking pins on the side of the glass shelf, and slide the new track into place by lining it up with the locking slots. Replace the shelf and crisper drawer. This repair is rated as very easy by our customers, taking less than 15 minutes to complete and requiring no tools.
Water Inlet Valve – Part Number: W10408179
$108.19
In Stock
Water Inlet Valve
★★★★★
★★★★★
(52)
Part #W10408179
This water inlet valve supplies water to your refrigerator’s ice maker and dispenser. It includes a valve, tubing, and a coupling. The pre-filter bracket connector must be purchased separately if required. Unplug the refrigerator and wear gloves for safe installation.
Refrigerator Bimetal Defrost Thermostat – Part Number: WPW10225581
$48.43
In Stock
Refrigerator Bimetal Defrost Thermostat
★★★★★
★★★★★
(18)
Part #WPW10225581
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

Exact Part matches for your search term

Handled, lh – Part Number: 106556
No Longer Available
Handled, lh
This part number matches the current model number 106556
Part #106556

Common Symptoms of models starting with 106556

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
was not making ice
700 of 781 people found this instruction helpful.
  • GLENN from ORLAND PARK, IL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker.
Was this helpful?
Thank you for voting!
Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.
596 of 639 people found this instruction helpful.
  • Max from Green Castle, IN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
Was this helpful?
Thank you for voting!
Replaced Two Broken Tracks
541 of 554 people found this instruction helpful.
  • Steve from Milton, GA
  • Difficult
  • Less than 15 mins
The old tracks had been falling out consistently, causing the deli tray to fall on top of the food below it (which included the eggs, though none were broken since they were in a hard plastic container).

I had some difficulty getting the new track installed, however. All the parts lined up, but I just couldn't get the tracks t o slide into place. After some brute force and about 10 minutes, they were finally installed.

Best thing about it is that it doesn't appear that these tracks are coming out easily! Mission accomplished!
Was this helpful?
Thank you for voting!