10650444901 Kenmore Refrigerator - Instructions

All Instructions for the 10650444901
121 - 135 of 558

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
fridge stopped cooling then the freezer
4 of 4 people found this instruction helpful.
  • Joseph from DELTONA, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Searched my issue on the internet then chose part select to see if bi-metal thermostat was available and it was so I ordered part which was under $30.00 incl. shipping. I then went to You Tube to watch how to replace the part but most importantly to find out where it was located and degree of difficulty. Replacement was rather simple and it fixed our 22 year old fridge. I must add that when I looked up the part it also told you what percent of the time that particular item actually fixed the problem based on others experience. I thought that was neat info. as I felt better about ordering something that may or may not fix my problem. Thank you,
Was this helpful?
Thank you for voting!
Click
4 of 4 people found this instruction helpful.
  • James from FLATWOODS, KY
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
By following your information
Was this helpful?
Thank you for voting!
Refrigerator light would not turn on.
5 of 8 people found this instruction helpful.
  • Suzanne from STERLING HTS, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I first replaced the switch and had no results, I then ordered the Light Socket Kit, and because I had the experience of removing the panel to replace the switch, it took a few minutes to remove the two screws behind the panel, removing the temperature control knobs and then releasing the face plate which is secured by tabs at the bottom. The kit came with extra connectors in case they were needed, but they were not in my case and so I pulled off the wires, pushed the old socket out and the new one in. Attaching the wires to the correct pins, I screwed in the light bulb to be sure that the fix was correct and determining that, I replaced the screws that held the panel in place. Voila, I'm a happy camper who found some outdated jars in the back corners of the newly lighted shelves.
Was this helpful?
Thank you for voting!
the icemaker make the noise, but wouldn't produce ice. When we took the ice tray off, we saw that the metal piece that turned the ice crusher was broken.
7 of 14 people found this instruction helpful.
  • Ruth from Eureka, IL
  • Easy
  • Less than 15 mins
  • Screw drivers
I used the computer to enter the make and model of the refrigerator with the icemaker unit. We looked at the diagram to identify the name of the part and then ordered it. It was sent out the next day! We received it and installed it and it works perfect!
Was this helpful?
Thank you for voting!
Cap for filter broke the tabs off when I forgot to depress the release.
3 of 3 people found this instruction helpful.
  • Marlon from CLINTON, MO
  • Very Easy
  • Less than 15 mins
The cap will only fit on one way. Align with tabs on filter, twist on. Press the filter into place and press to seat. Locks into place.
Was this helpful?
Thank you for voting!
Raplaced switch
5 of 9 people found this instruction helpful.
  • Winston A from Brooklyn, NY
  • Really Easy
  • Less than 15 mins
  • Pliers
Repair went well,took about five to ten minutes to disconnect the power from the fridge removed the defective switch installed the new one ,reconnected the power,,,and Let there be light and there was light!
Was this helpful?
Thank you for voting!
Part went bad the freezer was freezing up and refrigerator not getting cold
3 of 3 people found this instruction helpful.
  • Jessica from WILLIAMSBURG, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I pulled off the panel covering the part in the freezer cut and stripped the wires. Used crimper and connectors put the new part on put the wires band panel back on and plugged the refrigerator back in. Everything works just fine now.
Was this helpful?
Thank you for voting!
Well, somehow when I replaced the water filter I turned and don’t suppose to so, it did started licking.
3 of 3 people found this instruction helpful.
  • Yolanda from LA VERGNE, TN
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
First, I watched the video the sale agent sent it to me. Then I decided to do it myself, I’m a 62 woman that I like to show myself how smart we are as a human being, thanks God! It took me less than 30 minutes to make it work!!!!
Was this helpful?
Thank you for voting!
door would not close automatically and replaced torn gasket.
3 of 3 people found this instruction helpful.
  • JOHN from DALLAS, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
removed door took out single bolt pried out cam put new one in returned bolt rehung door. 15 minutes

pulled old gasket out cleaned area where gasket was and lube edge of new gasket with vaseline starting at top slide gasket in then sides last was bottom which was hardest. 20 minutes
Was this helpful?
Thank you for voting!
clicking sound
3 of 3 people found this instruction helpful.
  • Ronald J from TULSA, OK
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
unplugged the power and removed the cardboard back Unplugged the part and power from the side of the compressor Plugged the power and new part back in to the side of the compressor and replaced the clamp Plugged in the power cord to the wall outlet and the refrigerator started to hum Job done Thanks
Was this helpful?
Thank you for voting!
lights wouldn't come on/work in refrigerator
4 of 6 people found this instruction helpful.
  • Jane from Albuquerque, NM
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
Referencing the info/schematics you have on your website, I unscrewed/unattached top-front panel (carefully), from behind the panel you have to detach the wires (2) from the switch, pushed "in" the switch to remove, put in new switch and attach wires to test BEFORE remounting panel. Tada!! Thank you PartSelect! You saved me at least $80.. .would have been at least $100 to have a repair person come to the house!
Was this helpful?
Thank you for voting!
Leaking water from filter housing
3 of 3 people found this instruction helpful.
  • Dennis from SPRING HILL, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Followed the directions from the video and almost everything went great. The toughest part of the repair was removing the push button cap from the old housing.
Was this helpful?
Thank you for voting!
water would not go thru filter
3 of 3 people found this instruction helpful.
  • CHARLES from SAND ROCK, AL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
removed 8 screws 3 hose connections and done....hardest thing was getting up from the floor!!!
Was this helpful?
Thank you for voting!
Needed to replace the Refrigerator Water Filter and Water Filter Housing
3 of 3 people found this instruction helpful.
  • Mildred from DETROIT, MI
  • Really Easy
  • 30 - 60 mins
I watch the video and it was easy as pie 1,2,3 and I was done in know time flat...Thanks for everything I'd recommend these how to do videos to anyone they will save time and money on all your appliance repairs!


Sign; Tony Walker
Was this helpful?
Thank you for voting!
Top half of freezer & fridge were not cooling. Freezer fan had been making unusually loud noises.
3 of 3 people found this instruction helpful.
  • rich from PEMBROKE PNES, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Piece of cake. It took me longer to remove the food from the freezer, remove shelves and back panel than to do the repair. I heard the fan making some noises so I replaced both the fan and defrost thermostat. I used the instructions submitted by a another customer. My 20+ year old fridge is like new now.
Was this helpful?
Thank you for voting!
All Instructions for the 10650444901
121 - 135 of 558