Models > 10641264801 > Instructions

10641264801 Kenmore Refrigerator - Instructions

All Instructions for the 10641264801
76 - 90 of 562
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn Down Upper And Lower Cam
Took off refrigerator door from top hinge and lifted off. A little difficulty getting worn out parts off (needed dremel to drill out worn plastic); replaced with new parts, the screw head holding on the part was starting to be worn as well but still worked. If I hadn't got to this repair soon the bottom of the door aluminum would have total worn out as it is, it has a deep groove but not noticeable. The new cams also force the door closed tight instead of slightly ajar at times.
Parts Used:
Refrigerator Lower Door Closing Cam Refrigerator Door Cam
  • Jose from Corona, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench set
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My drawer had been broken and I needed a new one.
When I took the pan out of the box, it was not the exact same as the one I had. But it fit perfect. The only hard part was the fact that it looked so good I had to clean the entire fridge side. (Smile)
Parts Used:
Refrigerator Crisper Drawer With Handle
  • Jennifer from Birmingham, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The shelf runner broke
Took out the old one and put in the new one. No tolls required. It did give me the opportunity to clean the back wall of the refrigerator.
Parts Used:
Crisper Cover with Glass
  • Andrew F from Media, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper Frame And Pan
Jus took me seconds to replace both items. No problem.
Parts Used:
Crisper Cover with Glass Refrigerator Crisper Drawer with Humidity Control
  • Mauricio from National City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chrisper pan support cracked due to overfilling
removed old shelf support after taking out the glass and support. New part was a perfect fit that was a "shap: to put in.
Parts Used:
Crisper Cover with Glass
  • David from Lenexa, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shelves and drawer were cracked.
put new ones in place.
Parts Used:
Refrigerator Slide-Out Shelf with Glass Refrigerator Crisper Drawer With Handle Refrigerator Shelf Glass Crisper Cover with Glass
  • Esther M from NEW IBERIA, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced broken parts
Replacing the broken parts for my Whirlpool refrigerator was very easy and the price was reasonable.
Parts Used:
Refrigerator Slide-Out Shelf with Glass Snack Pan - Clear Refrigerator Crisper Drawer with Humidity Control
  • Pearlie from FLORISSANT, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old gasket was not sealing door would open when freezer door closed
remove door pull gasket out put new gasket in replace door
Parts Used:
Fresh Food Door Gasket - Misty Beige
  • clive from parlin, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
20 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light not working in fridge
It was so easy!

Thanks for the rush to my home on the part.

I just unscrewed the plate that locks in the light switch (screwdriver) and unplugged the old faulty part and plugged in the new switch, screwed the cover back on and I was done!

Easy!

And I am not Mr. Fix-it!
Parts Used:
Refrigerator Door Switch
  • Michael from East Meadow, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door bin was broken
took old bin out replaced with new , two minute job
Parts select is an easy co. to do business with THANKS Andrea
Parts Used:
Refrigerator Door Shelf Bin
  • Andrea from Cornelius, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drawer
replaced
Parts Used:
Refrigerator Crisper Drawer With Handle
  • Thomas from North Port, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crack in vegetable drawer
Emptied draw of contents pulled draw out and inserted new drawer....easy pea-zee
Parts Used:
Refrigerator Crisper Drawer With Handle
  • Paul from NAYLOR, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan motor was making noise.
First I removed all food in freezer.Then removed selves and hanger brackets.Then the back panel and light cover.Then I unplugged motor but before this I unplugged refrigerator from the wall.Removed motor from bracket after pulling of fan. Reversed the order to install motor and put back together
Parts Used:
Evaporator Fan Motor - 120V 60Hz Fan Grommet
  • Harry from Mountain Iron, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a broken door bin
Nothing to do, part came, fully assembled, it just went right into the door. Yea!!!
Parts Used:
Refrigerator Door Shelf Bin
  • Lorraine from Brush Prairie, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All three lights are not working...lights are off but refrigerator still cooling. Also, the control box not lit up to show the temparture for freezer and refrigerator
Used a screw driver to pull old switch. Pulled one wire at a time, only two wires. After wires instlled to new switch push new one back in place where the old one was.
Parts Used:
Refrigerator Door Switch
  • Antonio from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10641264801
76 - 90 of 562