- Home
- 10641262801
- Instructions
10641262801 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door would not auto close
18 of 25 people
found this instruction helpful.
-
James from Hampton, NH
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set
I removed the screws on the upper hinge and removed the door. I removed the lower cam in about 2 minutes and had it replaced. The upper cam was a tight fit in the door and I resorted to vise-grips to remove it. Total time to replace cams and put the door back on was 30 minutes. This saved me $100.
Thanks
Thanks
Other Parts Used:
Was this helpful?
Thank you for voting!
original parts--shelves had broken
14 of 14 people
found this instruction helpful.
-
Paul from E BRIDGEWTR, MA
- Really Easy
- Less than 15 mins
simply slid out old damaged/taped up shelves and slid in the new ones i ordered,
Other Parts Used:
Was this helpful?
Thank you for voting!
The icemaker in the fridge stopped working
18 of 27 people
found this instruction helpful.
-
Rebecca from Dayton, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair was so simple. I removed the old icemaker in about 3 minutes and unpacked and installed the new one is about 10 minutes. It was literally a matter of removing a few screws! Eady to follow instructions!
Was this helpful?
Thank you for voting!
The edges of the Meat pan slide were broken.
15 of 18 people
found this instruction helpful.
-
Michael from Bakersfield, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the glides under the edges of the meat pan, remove the old pan, put the new pan in and replaced the glides. I was very pleased with PartSelect. I ordered my part, and it arrived the very next day. I will definitely order my next replacement part thru PartSelect.
Was this helpful?
Thank you for voting!
Compresser would not kick in, it would click on and off.
15 of 19 people
found this instruction helpful.
-
terry from farmington, MO
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unplugged the starter from compresser and put the new part in and all worked. Great service and I like the OEM parts not aftermarket. Will definately do service with you again. Thanks for making my life easier.
Other Parts Used:
Was this helpful?
Thank you for voting!
light inside fridge was flickering and clicking
20 of 35 people
found this instruction helpful.
-
bill from escondido, CA
- Easy
- 15 - 30 mins
-
Nutdriver
tested bulb good ,replaced door switch first(least expensive)then ordered light socket and circuitboard.If clicking sound is heard replace circuitboard first to save on return shipping because the switch and socket where ok
Was this helpful?
Thank you for voting!
burned out Evaporator Fan Motor
16 of 23 people
found this instruction helpful.
-
Robert from Surprise, AZ
- Really Easy
- 15 - 30 mins
-
Screw drivers
simply removed wires from the old motor and gently lifted it out by by the metal clips - put the old bracket on the new motor, snapped on the new fan, replaced the wires, reinstalled the shield. All done in about 15 min.
Other Parts Used:
Was this helpful?
Thank you for voting!
Not enough door storage
13 of 14 people
found this instruction helpful.
-
Dennis from Owings, MD
- Really Easy
- Less than 15 mins
Excellent fit and installation. The door bins slid right in and created the extra space needed on the shelves.
Was this helpful?
Thank you for voting!
Cracked Crisper Drawer
13 of 15 people
found this instruction helpful.
-
Jennifer from Salvisa, KY
- Really Easy
- Less than 15 mins
This company is WONDERFUL! I ordered the wrong drawer the first time, but their return process was a snap and the correct drawer arrived the next day. It's great to know that there is someone out there with just about every part you'll need for about any appliance that is truly customer friendly.
Was this helpful?
Thank you for voting!
The freezer wouldn't freeze and the refrigerator wouldn't refrigerate.
13 of 15 people
found this instruction helpful.
-
Leandro from Baldwin Park, CA
- Easy
- Less than 15 mins
-
Screw drivers
Same as everybody else on this post. Real easy. Actually, I just wish I would have done it sooner.
Was this helpful?
Thank you for voting!
Refrigerator door shelf and door shelf bin are broken.
13 of 16 people
found this instruction helpful.
-
Jianping from DURHAM, NC
- Really Easy
- Less than 15 mins
Just replaced the broken one without using any tools.
Other Parts Used:
Was this helpful?
Thank you for voting!
Wrong electrical connector.
13 of 16 people
found this instruction helpful.
-
ROBERT from BUENA PARK, CA
- Very Difficult
- More than 2 hours
I bought a new Whirlpool Refrigerator that didn't have an ice maker.
I wanted to install an ice maker. I searched your web site and found the model ice maker model it said I needed. WPW10715709. This one was a 4 wire 8 terminal. I needed a 4 wire flat connector. WPW10715708. You approved the return. It cost me $50 to return it. I bel ... Read more ieve you should refund me the cost of this postage. Your web site gave me the wrong model number.
Thank you
I wanted to install an ice maker. I searched your web site and found the model ice maker model it said I needed. WPW10715709. This one was a 4 wire 8 terminal. I needed a 4 wire flat connector. WPW10715708. You approved the return. It cost me $50 to return it. I bel ... Read more ieve you should refund me the cost of this postage. Your web site gave me the wrong model number.
Thank you
Read less
Was this helpful?
Thank you for voting!
Rattling noise in beind freezer compartment
14 of 19 people
found this instruction helpful.
-
Herman from Cottonwood, AZ
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
remove shelves in freezer compartment incl.holders(slide up to remove)
Remove lamp/shield
Remove panel (six phillips screws)
disconnect motor
pull off fan blade
squeeze bracket holding motor to remove
remove motor.
Re-assemble (in reverse)
Remove lamp/shield
Remove panel (six phillips screws)
disconnect motor
pull off fan blade
squeeze bracket holding motor to remove
remove motor.
Re-assemble (in reverse)
Other Parts Used:
Was this helpful?
Thank you for voting!
Refrigerator quit cooling, freezer defrosted making a huge mess in kitchen floor
11 of 11 people
found this instruction helpful.
-
Kevin from ANDERSON, SC
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
First, verified power supply. I have power at wall outlet, no power at compressor. Also noticed no condenser fan operation. Searched YouTube and watched a few diagnostic videos of how to test for proper operation of my model. Dropped the control panel down to reveal the thermostat switch and control board. Wiggled thermostat knob and comp
... Read more
ressor would work intermittently. Thermostat bad internally. Removed wiring connections, removed cover over temp.probe. slowly removed capillary tube. Removed plastic sheath from tube. Take your time installing new capillary tube into plastic sheath as not to kink and damage tube. Route the new tube back into position that the old one was in. Reinstall covers. NOTE: My wiring terminals on the new switch were in different locations but the switch was the same dimensions. I used a multi-meter to determine the correct wire locations on new switch and installed. Reconnected power and all works well now.
Read less
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 people
found this instruction helpful.
-
Michelle from Richardson, TX
- Really Easy
- Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!