10641122211 Kenmore Refrigerator - Instructions

All Instructions for the 10641122211
121 - 135 of 294

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Maximize door storage
2 of 2 people found this instruction helpful.
  • kenneth from YORBA LINDA, CA
  • Very Easy
  • Less than 15 mins
Unpack, wash in warm soapy water, slide into pkace
Was this helpful?
Thank you for voting!
SIDE OF BIN'S RUNNER HAD WORN OFF
2 of 2 people found this instruction helpful.
  • Roy from BEAUMONT, TX
  • Really Easy
  • Less than 15 mins
The hard part was getting the right part ordered!
The exploded view needs to be bigger as it is hard to differentiate.
A phone call fixed everything.
Was this helpful?
Thank you for voting!
Cracked crisper drawer.
2 of 2 people found this instruction helpful.
  • Claude from KLAMATH FALLS, OR
  • Very Easy
  • Less than 15 mins
Removed old drawer and replaces with new one. A perfect fit. E-bay advertised free shipping, but their price was higher than PART SELECT WITH THE SHIPPING CHARGE.
Was this helpful?
Thank you for voting!
My shelves had cracked and broke
3 of 5 people found this instruction helpful.
  • Deborah from WALDORF, MD
  • Really Easy
  • Less than 15 mins
Order new shelves
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people found this instruction helpful.
  • dorotea from staten island, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people found this instruction helpful.
  • Thomas from Roseville, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people found this instruction helpful.
  • stu from richmond, VA
  • Easy
  • Less than 15 mins
  • Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
Meat Tray For Refrigerator
3 of 5 people found this instruction helpful.
  • Monica from Red Oak, TX
  • Really Easy
  • Less than 15 mins
Placed tray on lower part of refrigerator.
Was this helpful?
Thank you for voting!
Broke light switch while cleaning
2 of 3 people found this instruction helpful.
  • Gail from Golden, CO
  • Really Easy
  • Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
cracked meat pan
2 of 3 people found this instruction helpful.
  • John from Miami, FL
  • Really Easy
  • Less than 15 mins
Very simply change old part just by hand
Was this helpful?
Thank you for voting!
lights not working
3 of 6 people found this instruction helpful.
  • GARY W from KANSAS CITY, KS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
watch your how to fix ...had to buy main board and second light but i got it fix save me from calling repair man
Was this helpful?
Thank you for voting!
Lights not working or verily lighting up.
3 of 6 people found this instruction helpful.
  • Frederick from GEORGETOWN, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replaced LED light control board plugged refrigerator back in light worked twice circuit board burned up.
Ordered a new cheaper light board installed work fine.
Was this helpful?
Thank you for voting!
refrigerator not freeze
2 of 3 people found this instruction helpful.
  • edgar from PAWTUCKET, RI
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
i didn't repair replace capacitor, bi metal defrost thermostat and still not freeze also replace light door switch any suggestion thanks
Was this helpful?
Thank you for voting!
none
2 of 3 people found this instruction helpful.
  • Joseph from BONITA SPGS, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
install ice maker 2 screws wire harness pluged in done
Was this helpful?
Thank you for voting!
Tray missing
2 of 3 people found this instruction helpful.
  • Ouida from LORMAN, MS
  • Really Easy
  • 15 - 30 mins
Simple fix. I watched the video it was great.
Was this helpful?
Thank you for voting!
All Instructions for the 10641122211
121 - 135 of 294