All Installation Instructions for Kenmore Refrigerator 10632853010

install ice maker with all parts for refridgerator with no ice cube hardware on it.

I followed the directions and it worked.

Parts Used:

ICE MAKER KIT-PKG ASSEMBLY (EZ

Vincent from THE VILLAGES, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator not freeze

i didn't repair replace capacitor, bi metal defrost thermostat and still not freeze also replace light door switch any suggestion thanks

Parts Used:

Refrigerator Bimetal Defrost Thermostat

edgar from PAWTUCKET, RI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

none

install ice maker 2 screws wire harness pluged in done

Parts Used:

ICE MAKER KIT-PKG ASSEMBLY (EZ

Joseph from BONITA SPGS, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Broke light switch while cleaning

use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks

Parts Used:

Refrigerator Door Switch

Gail from Golden, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Light switch broke

Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.

Parts Used:

Refrigerator Door Switch

Carolee from Spokane Valley, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

The Light Socket Burned Out.

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Parts Used:

Light Socket Kit

MATTHEW from STOCKTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Light rocker switch broke and refrigerator light couldn't go on.

I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.

Parts Used:

Refrigerator Door Switch

Cathy from HOPATCONG, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

MISSING PAN

Nothing could have been any easier...just slid it into place! And the result was that I felt as if I had a brand new refrigerator! Very Happy Customer!

Parts Used:

Crisper Pan

LISA from BROWNSVILLE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

3 screws

Ice maker fit perfectly over 2 top screws. I tightened them and put the one on the bottom. I was done in less than 10minutes. Everything fit perfectly as expected. Couldn't have been eaiser. Parts Select is my go to online store.

Parts Used:

ICE MAKER KIT-PKG ASSEMBLY (EZ

Michael from SALINA, KS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Rail in door was busted on end and I had it taped in place.

Remove old rail. Clean refrigerator of tape residue. Pop New rail in place!

Parts Used:

Refrigerator Door Shelf Rail

Robin from PT CHARLOTTE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Fan was not spinning make it not cold in bottom part

Take screws out pull panel out unconnect the part connect new one and your done

Parts Used:

Freezer Evaporator Fan Motor

Dylan from WHEELING, WV
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Apartment rental missing refrigerator shelf

Slid into correct slot

Parts Used:

Refrigerator Door Shelf Rail

Marilynn from VIRGINIA BCH, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Warm fridge and freezer but compressor was running. No air distribution inside fridge

I turned breaker off to fridge, it was easier than pulling fridge out in camper. I took 4 screws out of back panel that revealed the evap fan, took 2 more screws out to take fan bracket off. Unplugged fan plug. Took fan blade off the non working evap motor and put it on the new evap motor. Put all the screws back in the reverse order and flipped the breaker and air started circulating.

Parts Used:

Freezer Evaporator Fan Motor