My Orders
1056 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Melted plastic colander on a burner
2 of 3 people
found this instruction helpful.
-
Paula from Dyersburg, TN
- Really Easy
- Less than 15 mins
I simply replaced the element. HOWEVER, the most wonderful parts of this repair...Because of the pictures and closeups and descriptions I knew exactly 'what' to order! And I had the replacement in less than 24 hours. I can do some home repairs but this company provided such detailed information AND speed of delivery...that this was a no-f
... Read more
uss fix. I'll definitely stop by to buy, again. Thanks!
Read less
Was this helpful?
Thank you for voting!
bottom trim had rusted out from water build-up
3 of 6 people
found this instruction helpful.
-
john from buford, GA
- Really Easy
- Less than 15 mins
-
Socket set
disassembled bottom trim on oven door.cleaned area of excess rust and installed trim piece.
Was this helpful?
Thank you for voting!
Refrigerator door handle had broken off
3 of 6 people
found this instruction helpful.
-
Sherri from Fredericksburg, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the parts of the handle that were still hanging onto the door then put the new handle in place with the new screws. Nothing could have been easier
Was this helpful?
Thank you for voting!
I Had A Refr. Brand Nam Was Holliday
1 person
found this instruction helpful.
-
MANSOUR from MONROE, LA
- Really Easy
- Less than 15 mins
-
Screw drivers
I had a frg for one of my tenants that the handle was missing I had hard time to find it I went to partselect site and was able to get it very easy to instal took only 3 min. Tenanat happy I was happy too
Was this helpful?
Thank you for voting!
My burner trays were worn out and I needed new ones
1 person
found this instruction helpful.
-
Mary Jane from La Junta, CO
- Really Easy
- Less than 15 mins
I simply pulled the old ones out and replaced them with the new ones. It looks so much better and cleanes up well.
Other Parts Used:
Was this helpful?
Thank you for voting!
The light inside the oven had burned out
3 of 7 people
found this instruction helpful.
-
Catherine from SEATTLE, WA
- Very Easy
- Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
Read less
Was this helpful?
Thank you for voting!
End cap broke on handle
1 person
found this instruction helpful.
-
Jim from NORTH HAVEN, CT
- Very Easy
- 15 - 30 mins
-
Screw drivers
Opened oven door removed screw and broken end cap. Replaced with new end cap and put handle back on
Was this helpful?
Thank you for voting!
broken heating element
1 person
found this instruction helpful.
-
Sherry from BLUFFTON, SC
- Very Easy
- Less than 15 mins
remove broken heating element and install the new one
Was this helpful?
Thank you for voting!
Old burner bowl needed to be replaced
2 of 4 people
found this instruction helpful.
-
bonnie from N KINGSTOWN, RI
- Very Easy
- Less than 15 mins
Took out the old & put in the new one-Done!
Was this helpful?
Thank you for voting!
a plug on the element broke off while cleaning and replacing
1 person
found this instruction helpful.
-
David from WEST WARWICK, RI
- Very Easy
- Less than 15 mins
Absolutely no tools required for this task. Simply align the prongs to the female portion on the stove top. Carefully push in until the element is in place then line up with the drip pan slot. No instructions are necessary!!
Was this helpful?
Thank you for voting!
dropped & broke the oven light bulb cover
1 of 2 people
found this instruction helpful.
-
joseph from san jose, CA
- Really Easy
- Less than 15 mins
popped the new one on!
Was this helpful?
Thank you for voting!
Just follow the enclosed instructions
1 of 2 people
found this instruction helpful.
-
HAROLD from Tucson, AZ
- Really Easy
- 30 - 60 mins
-
Nutdriver
Followed the instructions
Was this helpful?
Thank you for voting!
Change bulb
3 of 8 people
found this instruction helpful.
-
Louis from LEAGUE CITY, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver
Easy
Was this helpful?
Thank you for voting!
Bad sensor
1 of 2 people
found this instruction helpful.
-
John from CASPER, WY
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
By myself
Was this helpful?
Thank you for voting!
Orignal oven door handle had multiple fractures and was fast becoming useless.
3 of 9 people
found this instruction helpful.
-
Gerald from Omaha, NE
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed the old handle with the new one.
Was this helpful?
Thank you for voting!