10471 General Electric Range - Instructions

All Instructions for the 10471
31 - 45 of 63

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Intermittent heat then no heat on oven element
2 of 3 people found this instruction helpful.
  • Bruce from AKRON, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
With multimeter checked resistance of oven sensor. Specs called for 1100 ohms. It was off by 27 ohms. The sensor from Part Select had exact wire connection as original. Then just matter of undoing old and reconnecting with new one.

One unsatisfactory event. I asked Part Select why my clock did not work or light up(timer works ok) . Answer was: sorry we have no time to help you. That soured the otherwise happy experience.
Was this helpful?
Thank you for voting!
My burner trays were worn out and I needed new ones
1 person found this instruction helpful.
  • Mary Jane from La Junta, CO
  • Really Easy
  • Less than 15 mins
I simply pulled the old ones out and replaced them with the new ones. It looks so much better and cleanes up well.
Was this helpful?
Thank you for voting!
The light inside the oven had burned out
3 of 7 people found this instruction helpful.
  • Catherine from SEATTLE, WA
  • Very Easy
  • Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap. ... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.
Was this helpful?
Thank you for voting!
End cap broke on handle
1 person found this instruction helpful.
  • Jim from NORTH HAVEN, CT
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Opened oven door removed screw and broken end cap. Replaced with new end cap and put handle back on
Was this helpful?
Thank you for voting!
Old burner bowl needed to be replaced
2 of 4 people found this instruction helpful.
  • bonnie from N KINGSTOWN, RI
  • Very Easy
  • Less than 15 mins
Took out the old & put in the new one-Done!
Was this helpful?
Thank you for voting!
Change bulb
3 of 8 people found this instruction helpful.
  • Louis from LEAGUE CITY, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Easy
Was this helpful?
Thank you for voting!
Bad sensor
1 of 2 people found this instruction helpful.
  • John from CASPER, WY
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
By myself
Was this helpful?
Thank you for voting!
Just follow the enclosed instructions
1 of 2 people found this instruction helpful.
  • HAROLD from Tucson, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Followed the instructions
Was this helpful?
Thank you for voting!
Orignal oven door handle had multiple fractures and was fast becoming useless.
3 of 9 people found this instruction helpful.
  • Gerald from Omaha, NE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the old handle with the new one.
Was this helpful?
Thank you for voting!
Obsolete appliance parts missing
1 of 3 people found this instruction helpful.
  • Darrell from Cape Coral, FL
  • Really Easy
  • Less than 15 mins
Thank goodness for PartSelect.com
When we moved into our home the microwave and electric range are obsolete appliances and were missing parts. PartSelect.com has pictures of parts on one inch grid pattern so I was able to select the hard to find parts that would fit perfectly and they did.
Was this helpful?
Thank you for voting!
Oven handle broke off
3 of 9 people found this instruction helpful.
  • Maureen from Locust Valley, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Couple of screws and it was done. Simple and inexpensive since I thought I was going to have to buy a new range.
Was this helpful?
Thank you for voting!
Replace Drip Pans on Stove Top
0 of 1 people found this instruction helpful.
  • Shawn from Lubbock, TX
  • Really Easy
  • Less than 15 mins
Just removed the old drip pans and then inserted new ones...pretty dog gone easy!
Was this helpful?
Thank you for voting!
Change out burner bowls
0 of 1 people found this instruction helpful.
  • Carolee from Carson City, NV
  • Really Easy
  • Less than 15 mins
Took out the old ones and replaced with the new ones. Very simple task. It didn't take 5 minutes.
Was this helpful?
Thank you for voting!
Oven door handle end caps broke
4 of 13 people found this instruction helpful.
  • Danette from Heber City, UT
  • Easy
  • Less than 15 mins
We were really happy with how quickly the parts we ordered were delivered to us. Replacing the endcaps was quick and easy.
Was this helpful?
Thank you for voting!
Oven Door Handle Broke
2 of 7 people found this instruction helpful.
  • Timothy from Waterford, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the 3 screws from the Door Handle End Cap that was broken and replaced it with the (easily ordered and quickly delivered) New End Cap.
The job was quick easy and we barely remember the door handle at all.
Was this helpful?
Thank you for voting!
All Instructions for the 10471
31 - 45 of 63