My Orders
- Home
- 1039857310
- Instructions
1039857310 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right Front [surface burner terminal block kit]
-
Wayne from Montoursville, PA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
We did the repair by following the inclosed instructions. we are elderly retired average ages 82. This was our first repair and it went very well. We are so pleased to have saved over $80.00 compared with hired labor 3 yre. ago for the same part. Thanks so much for your good service.
Was this helpful?
Thank you for voting!
drawer coming out of the track and falling to the floor.
-
Steven from Waukesha, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers
pulled drawer out and installed drawer guide
Was this helpful?
Thank you for voting!
Burner was unreliable...would stop working...I had already replaced the burner
-
Lelia from Vienna, VA
- A Bit Difficult
- 15 - 30 mins
-
Pliers, Screw drivers
I did as the video suggested.....I cut the old wires and spliced new ones already attached to the new terminal block. It would have been nice to have some instructions with the parts as I expected one piece but had to connect the wires to the new block and the new metal cover. I was guessing a bit. Also, I needed to use the holder str
... Read more
ip off my old part so that it displaced the new part back far enough to insert the burner connections. That meant finding a screw and nut small enough to allow the metal cover to fit on the block. But the burner works great. I've learned that any repair requires some ingenuity.
Read less
Was this helpful?
Thank you for voting!