10080B Briggs and Stratton Engine - Parts

A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartm...Read moreent without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.

This is an authentic replacement part manufactured for use with small engines. Seals can deteriorate overtime, and it is recommended to replace worn seals when servicing an engine. This seal is the lower seal in the engine's sump, the seal is sold individually.

This spark plug terminal is supplied directly from the original equipment manufacturer. The metal terminal is designed to fasten the spark plug to the engine lead wire. This component is sold individually, and needle nose pliers are helpful with the repair. Please refer to the appropriate diagrams of your engine model for the proper application of this hardware.

It is a genuine manufacturer-approved part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of the switch-interlock is to act as a safety feature which will shut the engine off. Unfortunately, over time parts will wear out and it may begin to fail eventually ...Read morerequiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch-interlock is sold individually.

This is an authentic replacement part manufactured for use with Briggs and Stratton small engines. The special intake gasket seals the connection between the breather tube and carburetor. It is recommended to replace the gasket when servicing the carburetor, or air cleaner to assure a good seal when reinstalling the parts. The intake gasket is sold individually.

This item has been OEM sourced to ensure quality. The spark plug is intended to be used with outboard motors and lawnmower engines from Briggs & Stratton. The spark plug threads into the cylinder and is used to create an electric arc that ignites the air/fuel mixture inside the combustion chamber. A spark plug wrench may be needed to install this part. This item is sold individually.